PT-HDBT-1010
4K 18Gbps HDMI HDBaseT 3.0 Extender Set
The PureTools 4K 18Gbps HDMI HDBaseT 3.0 Extender Set (PT-HDBT-1010) consists of a transmitter and receiver connected via Cat.5e/Cat.6a cable, transmitting uncompressed HDMI signals up to 80 metres at 4K 60Hz 4:4:4, or …
ManualFAQSpecificationsDatasheetCE declaration ↗Master data
The PureTools 4K 18Gbps HDMI HDBaseT 3.0 Extender Set (PT-HDBT-1010) consists of a transmitter and receiver connected via Cat.5e/Cat.6a cable, transmitting uncompressed HDMI signals up to 80 metres at 4K 60Hz 4:4:4, or up to 100 metres at 4K 60Hz 4:2:0, and supporting full 18Gbps data rate, HDR, and HDCP 2.2. It features four USB-A 2.0 device ports and one USB-B host port at both ends for KVM applications at up to 480Mbps USB 2.0 Hi-Speed, bidirectional IR and 1G Ethernet pass-through, HDMI loop output on the transmitter, and audio de-embedding plus three-mode ARC (HDMI, S/PDIF, Pass) with DIP switch selection. Both devices offer screw-lockable 12V power connections and PoC/PoH support so only one device requires power, status LEDs, 3-pin Phoenix connector for local RS232 control, and bi-directional CEC (except in ARC HDMI mode). The ARC HDMI mode does not support CEC signal forwarding, and RS232 control is local only and not transmitted over HDBaseT.
Product familyPureToolsCategoryHardwareRelease year2020Documentation as of10.11.2026 · Version 2Country of originChinaAvailable languages12 languagesDocuments✓ Manual✓ Datasheet– Quick start guideCE declaration ↗Compliance
Features
- Transmission of HDMI via HDBaseT 3.0 up to 100m (4K)
- Supports 18Gbps for resolutions up to 4K UltraHD 60Hz
- Bidirectional PoC and USB, pass-through for RS232 and Ethernet
- Transmission without compression with HDBaseT 3.0, screwable power supply
- Analog audio de-embedding, ARC functions, 4 USB-A 2.0 KVM ports at TX / RX
Scope of delivery
- 1x PT-HDBT-1010 Transmitter / Receiver Set
- 4x Mounting Ears with 2 Screws
- 8x Plastic Cushion
- 1x Power Adapter (24V, 1.25A)
- 1x User Manual
Product description
The PT-HDBT-1010 4K 18Gbps HDMI HDBaseT Spec 3 Extender Set consists of a transmitter (TX) and receiver (RX) and transmits HDMI signals via HDBaseT over Cat.5e or Cat.6a cable. The system supports 4K video at up to 60Hz with 4:4:4 subsampling up to 80 metres, and up to 100 metres at 4:2:0 subsampling. Features include HDMI loop output for local output at the transmitter, USB 2.0 signal extension, versatile ARC modes, Ethernet, IR, RS232 ports, stereo audio de-embedding, and bidirectional PoC/PoH power supply.
Transmission
- Transmits HDMI signals via HDBaseT using Cat.5e or Cat.6a cable.
- Distances: up to 80 metres for 4K at 60Hz 4:4:4, up to 100 metres for 4K at 60Hz 4:2:0.
- HDBaseT connection required between transmitter and receiver units.
Video
- Supports 4K resolutions with max. 60Hz at 4:4:4 subsampling (up to 80 metres).
- Supports 4K at max. 60Hz at 4:2:0 subsampling (up to 100 metres).
- HDMI loop output on transmitter for local output of HDMI signal at the TX location.
USB
- One USB-B and four USB-A connections per unit.
- USB-A 'Device' ports for connecting USB 2.0 devices; data transmitted via HDBaseT to the other device.
- Host PC connects to 'Host' USB-B port on transmitter or receiver.
- Hi-Speed USB 2.0 supported (max. 480Mbps data rate).
- Devices with USB 3.x or higher transmit with a maximum of 480Mbps USB 2.0 Hi-Speed data rate.
Audio
- ARC compatibility with three selectable modes via DIP switch: 'HDMI', 'S/PDIF', 'Pass'.
- In 'HDMI' mode: ARC signal from HDMI display on receiver is converted and transmitted back to transmitter via HDBaseT; output on HDMI and optical S/PDIF / Toslink ports; forwarding of CEC signals not supported in this mode.
- In 'S/PDIF' mode: ARC signal routed from S/PDIF input of receiver to HDMI and optical S/PDIF / Toslink ports; CEC line of display device remains available.
- In 'Pass' mode: ARC signal routed directly from HDMI output port of receiver to HDMI and optical S/PDIF / Toslink of transmitter including CEC.
- Transmitter features 3.5mm jack stereo connector for de-embedding analogue stereo audio from HDMI input.
Control
- Both units provide IR input and output via two 3.5mm jack sockets each.
- Connected display unit can be controlled from source unit side and vice versa.
- Supports CEC control data via HDMI and HDBaseT except in ARC 'HDMI' mode.
- Both units have 3-pin Phoenix connector for RS232 control; each can be controlled individually and locally.
- RS232 control data is not transmitted via HDBaseT from one unit to the other.
Network
- Bidirectional pass-through of 1G Ethernet signals supported.
Power
- Supports bidirectional PoC or PoH power supply via HDBaseT.
- Only one device requires the included power supply; the other is powered via Cat connection.
- 12V power connection of both units can be locked with a screw cap.
Indicators
- Both units have status LEDs for operating status, connection, HDCP version and loopout status.
Installation
- DIP switches on both devices allow selection between 'host' or 'device' mode for USB and ARC modes.
Compatibility
- Supports USB 2.0 devices (full 480Mbps speed); devices with USB 3.x or higher transmit at 480Mbps USB 2.0 Hi-Speed.
Other
- System consists of transmitter (TX) and receiver (RX) units.