Discontinued
PT-HDBT-701-TXWP
PureTools - HDBaseT Wallplate Transmitter, HDMI & VGA Inputs, 4K, 40m 4K / 70m 1080p
The PureTools HDBaseT Wallplate Transmitter features HDMI and VGA inputs and supports signal transmission of 4K over distances up to 40m and 1080p up to 70m.
ManualControl (TCP/IP)FAQSpecificationsFirmwareCEAvailable control interfaces. Expand an active type to see the full command table.
No matching commands.
RS-232 Commands1 commandsActive
Source: manual, chapter RS232 Control Software, page 18
| Command | Description | Example | Response | |
|---|---|---|---|---|
| 50701% | Example command sent to the device | 50701% | Any response from the connected device will appear in red |
RS232 Commands55 commandsActive
ConnectionCommunication protocol: RS232 Communication Protocol Baud rate: 9600 Data bit: 8 Stop bit: 1 Parity bit: none↓ CSV
Source: manual, chapter RS232 Command, page 13
| Command | Description | Response | |
|---|---|---|---|
| 50779% | Switch to RS232 mode 1（Default）, control scaler switcher and the far-end third-party device. | RS232 Mode 1: RS232 Control Scaler & Remote. | |
| 50780% | Switch to RS232 mode 2, control the scaler switcher from remote. | RS232 Mode 2:RS232 & Remote Control Scaler | |
| 50770% | Enable auto-switching | Auto Switching | |
| 50771% | Disable auto-switching | Manual Switching | |
| 50701% | Switch to HDMI input | Switch to HDMI | |
| 50704% | Switch to VGA input | Switch to VGA | |
| 50632% | Check the output resolution | Resolution: xx | |
| 50619% | Change the resolution to 1360X768 HD | Resolution: 1360x768 | |
| 50626% | Change the resolution to 1024X768 XGA | Resolution: 1024x768 | |
| 50627% | Change the resolution to 1280X720 720P | Resolution: 1280x720 | |
| 50628% | Change the resolution to 1280X800 WXGA | Resolution: 1280x800 | |
| 50629% | Change the resolution to 1920X1080 1080P | Resolution: 1920x1080 | |
| 50620% | Change the resolution to1920X1200 WUXGA | Resolution: 1920x1200 | |
| 50621% | Change the resolution to1600X1200 UXGA | Resolution: 1600x1200 | |
| 50790% | Set the HDCP status of HDMI output socket to Active | HDCP Active | |
| 50793% | Check HDCP status | HDCP Off/ HDCP On/ HDCP Active (default) | |
| 50636% | Check the brightness | Brightness: xx (xx=0099) | |
| 502xx% | Set the brightness to xx. | Brightness: xx (xx=0099) | |
| 50637% | Check the contrast | Contrast: xx (xx=0099) | |
| 503xx% | Set the contrast to xx. | Contrast: xx (xx=0099) | |
| 50638% | Check the saturation | Saturation: xx (xx=0099) | |
| 504xx% | Set the saturation to xx. | Saturation: xx (xx=0099) | |
| 50639% | Check sharpness | Sharpness: xx (xx=0099) | |
| 505xx% | Set the sharpness to xx. | Sharpness: xx (xx=0099) | |
| 50606% | Auto-adjust the input parameter | VGA Input Auto | |
| 50640% | Check the color temperature | Color Temperature: xx (xx can be medium, warm, user, or cool.) | |
| 50607% | Adjust the color temperature | Color Temperature: xx (xx can be medium, warm, user, or cool.) | |
| 50635% | Check the image aspect ratio | Aspect Ratio: xx (xx can be 16:9, 4:3, or auto.) | |
| 50608% | Set the aspect ratio | Aspect Ratio: xx (xx can be 16:9, 4:3, or auto.) | |
| 50633% | Check the picture mode | Picture Mode: xx (xx can be dynamic, standard, mild, or user.) | |
| 50614% | Set the picture mode | Picture Mode: xx (xx can be dynamic, standard, mild, or user.) | |
| 50707% | Check the present resolution and polarity | 1920x1080 Hpolarity:1 Vpolarity:0 | |
| 50705% | Change the horizontal polarity to the opposite | Hpolarity:0/1 | |
| 50706% | Change the vertical polarity to the opposite | Vpolarity:0/1 | |
| 50678% | Enable screen output adjusting | Enter Output Position Adjust | |
| 50679% | Disable screen output adjusting | Exit Output Position Adjust | |
| 50670% | Move the image to left | Output Position Adjust X xx | |
| 50671% | Move the image to right | Output Position Adjust X xx | |
| 50672% | Move the image up | Output Position Adjust Y xx | |
| 50673% | Move the image down | Output Position Adjust Y xx | |
| 50674% | Pull left from right side (decrease image width) | Output Width Adjust xx | |
| 50675% | Stretch right from right side (increase image width) | Output Width Adjust xx | |
| 50676% | Stretch upwards from bottom side (decrease image height) | Output Height Adjust xx | |
| 50677% | Stretch downwards from bottom side (increase image height) | Output Height Adjust xx | |
| 50772% | EDID pass-through (default) | EDID: bypass mode | |
| 50773% | Set EDID data to 1080P PCM 2.0ch | EDID:1080P&PCM 2ch | |
| 50774% | Set EDID data to 1080P Dolby 5.1 | EDID:1080P&5.1ch | |
| 50775% | Set EDID data to 1080P3D Dolby 5.1 | EDID:1080P3d&5.1ch | |
| 50776% | Set EDID data to 1080i PCM 2.0ch | EDID:1080i&PCM 2ch | |
| 50777% | Set EDID data to 4Kx2K PCM 2.0ch | EDID:4K&PCM 2ch | |
| 50778% | Check EDID data | EDID: bypass mode EDID:1080P&PCM 2ch EDID:1080P&5.1ch EDID:1080P3d&5.1ch EDID:4K&PCM 2ch | |
| 50799% | Program EDID file, send EDID data within 10s | Waiting for edid within 10 secs! | |
| 50698% | Software upgrading | ||
| 50699% | Check the software version | Version Vx.x.x | |
| 50617% | Restore factory default |