Active
PT-MA-HD44DA
4x4 4K 18Gbps HDMI Matrix with Scaler and Audio Matrix
The PT-MA-HD44DA is a professional 4x4 HDMI 2.0 matrix switcher with support for switching 4 HDMI inputs to 4 HDMI outputs, designed for HDMI 2.0 and HDCP2.3 compliant signals and resolutions up to UltraHD 4K 60Hz …
ManualControl (TCP/IP)FirmwareCE declaration ↗Available control interfaces. Expand an active type to see the full command table.
No matching commands.
IR Remote Control7 commandsActive
Source: manual, chapter IR Remote Control, page 16
| Command | Description | Example | Response | |
|---|---|---|---|---|
| Standby button | Press it to enter/ exit standby mode. | |||
| INPUTS | Input channel selection buttons, same with the corresponding front panel buttons. | |||
| OUTPUTS | Output channel selection buttons, same with the corresponding front panel buttons. | |||
| ALL | Select all inputs/outputs. To convert an input to all outputs: Example: Input 1 to all Outputs: → Press INPUTS 1 + ALL + ENTER | INPUTS 1 + ALL + ENTER | ||
| EDID | 1) One input port follows the EDID data from one output port. Example: Input 2 learns EDID data from output 4: → Press EDID + INPUTS 2 + OUTPUTS 4 + ENTER 2) All input ports learn EDID data from one output port. Example: All input ports learn EDID data from output 3: → Press EDID + ALL + OUTPUTS 3 + ENTER | EDID + INPUTS 2 + OUTPUTS 4 + ENTER EDID + ALL + OUTPUTS 3 + ENTER | ||
| CLEAR | Withdraw button. | |||
| ENTER | Confirm operation. |
RS-232 Commands56 commandsActive
ConnectionCommunication protocol: RS232 Communication Protocol Baud rate: 9600 Data bit: 8 Stop bit: 1 Parity bit: none↓ CSV
Source: manual, chapter RS232 Communication Commands, page 13
| Command | Description | Response | |
|---|---|---|---|
| PowerON. | Power on | Power ON! | |
| PowerOFF. | Power off | Power OFF! | |
| /*Name. | Query the name of matrix | PT-MA-HD44DA | |
| /*Type. | Query the model of matrix | HDMI Matrix | |
| /^Version. | Query the version of firmware | V1.0.0 CPLD:V1.0.0 | |
| RST. | Factory Default! | Factory Default! | |
| DS[xx]ON. | Able output devices down-scaling function. [xx]=00~02, xx=01~02 is the corresponding number of output 3 or 4 port, if the xx=00, it means both output 3 and 4 ports. | HDMI OUT xx Down Scale ON! | |
| DS[xx]OFF. | Disable output devices down-scaling function. [xx]=00~02, xx=01~02 is the corresponding number of output 3 or 4 port, if the xx=00, it means both output 3 and 4 ports. | HDMI OUT xx Down Scale OFF! | |
| @OUT[xx]. | Able HDMI 5V of output port. [xx]=00~04, xx=01~04 is the number of output port, if the xx=00, it means all output ports. | Turn ON Output 01! Turn ON Output 02! Turn ON Output 03! Turn ON Output 04! | |
| $OUT[xx]. | Disable HDMI 5V of output port. [xx]=00~04, xx=01~04 is the number of output port, if the xx=00, it means all output ports. | Turn OFF Output 01! Turn OFF Output 02! Turn OFF Output 03! Turn OFF Output 04! | |
| OUT[xx]:[YY]. | Output port select input port. [xx]=00~04, xx=01~04 is the number of output port, if the xx=00, it means all output ports. [YY]=01~04, YY=01~04 is the number of input port. | Output 01 Switch To In 04! | |
| GetGuiIP. | Query GUI IP | GUI_IP:192.168.0.178! | |
| SetGuiIP:xxx.xxx.xxx.xxx. | Set GUI IP | SetGuiIP:192.168.0.178! | |
| Baudratexxxx. | Set the baud rate of local serial port. xxxx=115200, 57600, 38400, 19200,or 9600 | Baudrate9600. Set Local RS232 Baudrate Is 9600! | |
| STA. | Query Status | GUI Or RS232 Query Status: 4x4 HDMI Matrix RD-MUH44A-H2 V1.0.0 Power ON! Front Panel UnLock! Local RS232 Baudrate Is 9600! GUI_IP:192.168.0.178! | |
| STA_POUT. | Query 5V Status of output port. | Turn ON Output 01! Turn ON Output 02! Turn ON Output 03! Turn ON Output 04! | |
| STA_IN. | Query 5V Status of input port. | IN 1 2 3 4 LINK N N N N | |
| STA_OUT. | Query HPD Status of output. | OUT 1 2 3 4 LINK N Y N N | |
| STA_VIDEO. | Query the input source of output port. | Output 01 Switch To In 01! Output 02 Switch To In 02! Output 03 Switch To In 03! Output 04 Switch To In 04! | |
| STA_DS. | Query Down-scaling Status | HDMI OUT 03 Down Scale ON! HDMI OUT 04 Down Scale ON! | |
| STA_HDCP. | Query current using HDCP model of all output ports. 01-04 represents output port 1-4. | OUT 01 HDCP BYPASS! OUT 02 HDCP BYPASS! OUT 03 HDCP BYPASS! OUT 04 HDCP BYPASS! | |
| STA_AUDIO. | Query audio switch and volume status of analog audio. | AUDIO Out 01 Switch To Video In 01! AUDIO Out 02 Switch To Video In 02! AUDIO Out 03 Switch To Video In 03! AUDIO Out 04 Switch To Video In 04! | |
| PresetSta[xx]. | Query the preset [xx]=01~09, xx=01~09 is the number of preset | Preset 01 Sta: Out 01 In 01! Out 02 In 01! Out 03 In 01! Out 04 In 01! | |
| PresetSave[xx]. | Save the preset | Preset 01 Sta: Out 01 In 01! Out 02 In 01! Out 03 In 01! Out 04 In 01! | |
| PresetRecall[xx]. | Preset recall | Preset 02 Recall: Output 01 Switch To In 02! Output 02 Switch To In 02! Output 03 Switch To In 02! Output 04 Switch To In 02! | |
| Lock. | Lock the front panel buttons. | Front Panel Locked! | |
| Unlock. | Unlock the front panel buttons. | Front Panel Unlock! | |
| AUDIO[xx]:[YY]. | SPDIF OUT and ANALOG OUT(They are same input audio source at one group) select which input audio source. [xx]=00~04 xx=01~04 is the number of the output port, if the xx=00, it means all output ports. [yy]=01~08 yy=01~04, it means de-embedded audio from HDMI1-4 input, if the yy=05~08, it means de-embedded audio from HDMI1-4 output. | AUDIO Out 01 Switch To Video In 04! | |
| AVOLUME[xx]:[YY]. | [xx]=00~04 xx=01~04 is the number of the Analog output port, if the xx=00, it means all Analog output ports. [YY]="V+" means volume up, [YY]="V-" means volume down, [YY]="MU" means Mute, [YY]="UM" means UnMute, [YY]=00-100 means setting volume | Analog Out 01 Volume 61! Analog Out 02 Volume 61! Analog Out 03 Volume 61! Analog Out 04 Volume 61! | |
| HDCP[xx]ON. | Force able and output HDCP 1.4. [xx]=00~04, xx=01~04 is the number of output port, if the xx=00, it means all output ports. | OUT 01 HDCP ON! OUT 02 HDCP ON! OUT 03 HDCP ON! OUT 04 HDCP ON! | |
| HDCP[xx]OFF. | Force disable the output HDCP. [xx]=00~04, xx=01~04 is the number of output port, if the xx=00, it means all output ports. | OUT 01 HDCP OFF! OUT 02 HDCP OFF! OUT 03 HDCP OFF! OUT 04 HDCP OFF! | |
| HDCP[xx]MAT. | Output HDCP follows the display. [xx]=00~04, xx=01~04 is the number of output port, if the xx=00, it means all output ports. | OUT 01 HDCP MAT Display! OUT 02 HDCP MAT Display! OUT 03 HDCP MAT Display! OUT 04 HDCP MAT Display! | |
| HDCP[xx]PAS. | Output HDCP follows the value and status of input source device. [xx]=00~04, xx=01~04 is the number of output port, if the xx=00, it means all output ports. | OUT 01 HDCP PASSIVE! OUT 02 HDCP PASSIVE! OUT 03 HDCP PASSIVE! OUT 04 HDCP PASSIVE! | |
| HDCP[xx]BYP. | Output HDCP follows input HDCP. Input has HDCP, output is HDCP1.4. Input doesn’t have HDCP, output is without HDCP. [xx]=00~04, xx=01~04 is the number of output port, if the xx=00, it means all output ports. | OUT 01 HDCP BYPASSS! OUT 02 HDCP BYPASSS! OUT 03 HDCP BYPASSS! OUT 04 HDCP BYPASSS! | |
| EDIDMInit. | Restore the factory default EDID data for each input. | All Input EDID Set Default! | |
| EDIDUpgrade[xx]. | Upgrade EDID via Serial Port [xx]=00~04 xx=01~04 is the number of input port(able EDID user-defined for corresponding HDMI input), if the xx=00, it means all input ports(able EDID user-defined for all HDMI inputs). Note: EDID user-defined can be used once, if switch to another EDID or exit, it will not be saved. [xx]=U. xx=U means user-defined for built-in EDID(It can be saved in machine for using at any time). Note: It can user-defined only one built-in EDID, after finishing it, machine still use previous built-in EDID. When received commands, machine will remind EDID file (.bin) to send within 10 seconds. | Input XX/User Define EDID Upgrade OK By RS232 Or GUI! | |
| EDID/[xx]/[yy]. | Input ports xx use built-in EDID yy [xx]=00~04 xx=01~04 is the number of the input port, if the xx=00, it means all input ports. [yy]=01~09 yy=01~08, it means built-in EDID that can not be user-defined, if the yy=09, it means user-defined EDID. | Input 03 EDID Upgrade OK By 01 Internal EDID! | |
| EDIDGOUT[XX]. | Read and print EDID of HDMI output, [XX]=01~04 is the number of the output port. | EDIDOUT04: …… | |
| EDIDM[xx]B[yy]. | Input port [yy] follows the EDID from output port [xx]. [xx]=01~04 xx=01~04 is the number of the output port. [yy]=00~04 yy=01~04 is the number of input port, if the yy=00, it means all input ports. | Input 01 EDID Upgrade OK By 04 EXT EDID! | |
| /+[X]/[yy]:xxx. | Send serial data to local. [X]= 1--2400；2--4800；3--9600；4--19200；5--38400；6--57600；7--115200. [yy] means the output port that sent serial data, yy=01 means local output. xxx. | ||
| EDIDSTA[xx]. | Query EDID status of Input port. [xx]=00~04, xx=01~04 is the number of input port, if the xx =00, it means all input ports. Note: If built-in EDID09 is not user-defined, when querying it, the input port will use EDID6 Internal EDID instead. For example, send "EDID/03/09.", "EDIDSTA03.", and the result is “Input 03 EDID From 06 Internal EDID!”. If built-in EDID09 has been user-defined, when querying it, the input port will use the user-defined EDID. For example, send "EDID/03/09.", "EDIDSTA03.", and the result is “Input 03 EDID From User Define EDID!”. | Input 01 EDID From 01 Internal EDID! Input 02 EDID From 01 Internal EDID! Input 03 EDID From 01 Internal EDID! Input 04 EDID From 01 Internal EDID! | |
| CECI[AA][BB][CC]00. | Confirm operation (Enter). | CECI02044400 CEC Input 02 Send Success! | |
| CECI[AA][BB][CC]01. | UP direction. | CECI01044401. CEC Input 01 Send Success! | |
| CECI[AA][BB][CC]02. | DOWN direction. | CECI01044402. CEC Input 01 Send Success! | |
| CECI[AA][BB][CC]03. | LEFT direction. | CECI03044403. CEC Input 03 Send Success! | |
| CECI[AA][BB][CC]04. | RIGHT direction. | CECI03044404. CEC Input 03 Send Success! | |
| CECI[AA][BB][CC]09. | Back to submenu. | CECI03044409. CEC Input 03 Send Success! | |
| CECI[AA][BB][CC]0A. | Enter main menu. | CECI0304440A. CEC Input 03 Send Success! | |
| CECI[AA][BB][CC]0D. | Exit menu. | CECI0204440D. CEC Input 02 Send Success! | |
| CECI[AA][BB][CC]6D. | Power on. | CECI0204446D. CEC Input 02 Send Success! | |
| CECI[AA][BB][CC]6C. | Power off. | CECI0204446C. CEC Input 02 Send Success! | |
| CECO[AA][BB][CC]41. | Volume up. | CECO04404441. CEC Output 05 Send Success! | |
| CECO[AA][BB][CC]42. | Volume down. | CECO04404442. CEC Output 05 Send Success! | |
| CECO[AA][BB][CC]43. | Mute | CECO04404443. CEC Output 05 Send Success! | |
| CECO[AA][BB]04. | Power on. | CECO038004. CEC Output 03 Send Success! | |
| CECO[AA][BB]36. | Power off. | CECO038036. CEC Output 03 Send Success! |