Active
PT-PSW-52KVM
18Gbps USB-C Collaboration Switcher Set with Dante and Multi-View
The PT-PSW-52KVM is a 5x2 HDBaseT 3.0 collaboration switcher that supports source selection between HDMI, USB-C DP Alt-Mode, and USB-B interfaces. It enables uncompressed 18Gbps 4K (60Hz 4:4:4) signal transmission over …
ManualControl (TCP/IP)FAQSpecificationsDatasheetWeb GUIFirmwareCE declaration ↗Available control interfaces. Expand an active type to see the full command table.
No matching commands.
RS-232 Commands61 commandsActive
Source: manual, chapter RS-232 Control Command, page 31
| Command | Description | Example | Response | |
|---|---|---|---|---|
| help | Get the list of all commands | help | =================== Help Info MCU 1.1.0 Web 1.1.0 Scaler 20230228-10 FPGA 1.1.0 RX 1.18.02 help Get the list of all commands | |
| r type | Get device model | r type | PT-PSW-52KVM | |
| r status | Get device current status | r status | Please refer to the note at the end of the list. | |
| r fw version | Get Firmware version | r fw version | MCU 1.1.0 Web 1.1.0 Scaler 20230228-10 FPGA 1.1.0 RX 1.18.02 | |
| s power on | Power on the device | s power on | Power on System Initializing... Initialization Finished! MCU 1.1.0 Web 1.1.0 Scaler 20230228-10 FPGA 1.1.0 RX 1.18.02 | |
| s power off | Power off the device | s power off | Power off | |
| r power | Get current power state | r power | power on /power off | |
| s reboot | Reboot the device | s reboot | Reboot… System Initializing... Initialization Finished! MCU 1.1.0 Web 1.1.0 Scaler 20230228-10 FPGA 1.1.0 RX 1.18.02 | |
| s reset | Reset to factory defaults | s reset | Reset to factory defaults System Initializing... Initialization Finished! MCU 1.1.0 Web 1.1.0 Scaler 20230228-10 FPGA 1.1.0 RX 1.18.02 | |
| s front button x | Set front button locked on/off (x=0~1) 0. Unlocked 1. Locked | s front button 0 | Front button: Unlocked | |
| r front button | Get front button locked on/off status | r front button | Front button: Unlocked | |
| s beep x | Set buzzer on/off (x=0~1) 0. Off 1. On | s beep 1 | Beep: On | |
| r beep | Get buzzer on/off status | r beep | Beep: Off | |
| s ir x | Set IR on/off (x=0~1) 0. Off 1. On | s ir 1 | IR: On | |
| r ir | Get IR on/off status | r ir | IR: Off | |
| s UsbcAccessNetwork x | Set USB-C access network feature on/off (x=0~1) 0. Off 1. On | s UsbcAccessNetwork 1 | USB-C Access Network: On | |
| r UsbcAccessNetwork | Get USB-C access network feature on/off | r UsbcAccessNetwork | USB-C Access Network: On | |
| s fan speed x | Set fan speed (x=0~4) 0. Auto 1. 25% 2. 50% 3. 75% 4. 100% | s fan speed 0 | Fan Speed: Auto | |
| r fan speed | Get fan speed | r fan speed | Fan Speed: Auto | |
| r temp | Get device internal temperature | r temp | Temp: 65C | |
| r input x EDID | Get input EDID mode (x=0~5) x=0: all inputs x=1: USB-C 1 x=2: USB-C 2 x=3: HDMI 3 x=4: HDMI 4 x=5: HDMI 5 | r input 0 EDID | Input USB-C 1 EDID: Auto Input USB-C 2 EDID: Auto Input HDMI 3 EDID: Auto Input HDMI 4 EDID: Auto Input HDMI 5 EDID: Auto | |
| r input x EdidData | Get input EDID Data (x=0~5) x=0: all inputs x=1: USB-C 1 x=2: USB-C 2 x=3: HDMI 3 x=4: HDMI 4 x=5: HDMI 5 | r input 0 EdidData | Input USB-C 1 EDID Data: Input USB-C 2 EDID Data: Input HDMI 3 EDID Data: Input HDMI 4 EDID Data: Input HDMI 5 EDID Data: | |
| s input x EDID y | Set input EDID (x=0~5) (y=1~16) x=0: all inputs x=1: USB-C 1 x=2: USB-C 2 x=3: HDMI 3 x=4: HDMI 4 x=5: HDMI 5 y=1: Auto (HDBT or HDMI or HDBT+HDMI) y=2: Copy HDMI OUT y=3: Copy HDBT OUT y=4: 4K2K60_444, Stereo Audio 2.0 y=5: 4K2K30_444, Stereo Audio 2.0 y=6: 1080P, Stereo Audio 2.0 y=7: 720p, Stereo Audio 2.0 y=8: 1920x1200, Stereo Audio 2.0 y=9: 1680x1050, Stereo Audio 2.0 y=10: 1600x1200, Stereo Audio 2.0 y=11: 1440x900, Stereo Audio 2.0 y=12: 1360x768, Stereo Audio 2.0 y=13: 1280x1024, Stereo Audio 2.0 y=14: 1024x768, Stereo Audio 2.0 y=15: User Defined 1 y=16: User Defined 2 | s input 0 EDID 1 | Input USB-C 1 EDID: Auto Input USB-C 2 EDID: Auto Input HDMI 3 EDID: Auto Input HDMI 4 EDID: Auto Input HDMI 5 EDID: Auto | |
| s output res x | Set Output Resolution (x=1~15) x=1: Auto x=2: 3840x2160p60 x=3: 3840x2160p50 x=4: 4096x2160p60 x=5: 4096x2160p50 x=6: 3840x2160p30 x=7: 3840x2160p25 x=8: 1920x1200p60RB x=9: 1920x1080p60 x=10: 1920x1080p50 x=11: 1360x768p60 x=12: 1280x800p60 x=13: 1280x720p60 x=14: 1280x720p50 x=15: 1024x768p60 | s output res 1 | Out Resolution: Auto | |
| r output res | Get output resolution | r output res | Out Resolution: Auto | |
| s output x hdcp y | Set output (x=0~2) hdcp (y=1~3) x=0: all outputs (HDMI/HDBT) x=1: HDMI output x=2: HDBT output y=1: Auto y=2: HDCP 1.4 y=3: HDCP 2.2 | s output 0 hdcp 1 | Output HDMI HDCP: Auto Output HDBT HDCP: Auto | |
| r output x hdcp | Get output hdcp status (x=0~2) x=0: all outputs (HDMI/HDBT) x=1: HDMI output x=2: HDBT output | r output 0 hdcp | Output All HDCP: Auto | |
| s output avmute x | Set output avmute on/off (x=0~1) x=0: Off x=1: On | s output avmute 1 | Output AV Mute: On | |
| r output avmute | Get output avmute on/off status | r output avmute | Output AV Mute: On | |
| s output freeze x | Set output freeze on/off (x=0~1) x=0: Off x=1: On | s output freeze 1 | Output Freeze: On | |
| r output freeze | Get output freeze on/off status | r output freeze | Output Freeze: On | |
| s output itc x | Set output video mode (x=1~2) x=1: Video mode x=2: PC mode | s output itc 1 | Output ITC: Video Mode | |
| r output itc | Get output video mode | r output itc | Output ITC: Video Mode | |
| s main in audio x | Set Main In (HDMI/USB-C In) audio from (x=1~6) x=1: Window 1 x=2: USB-C 1 x=3: USB-C 2 x=4: HDMI 3 x=5: HDMI 4 x=6: HDMI 5 | s main in audio 1 | Main In Audio: Window 1 | |
| r main in audio | Get Main In (HDMI/USB-C In) audio source | r main in audio | Main In Audio: Window 1 | |
| s output x audio y | Set output (x=0~3) audio source from (y=1~3) x=0: all outputs (HDMI/HDBT, Line, Dante) x=1: HDMI/HDBT Out x=2: Line Out x=3: Dante Out y=1: Main In (HDMI/USB-C In) y=2: Line In y=3: Dante In | s output 0 audio 1 | Output HDMI/HDBT Audio: Main In (HDMI/USB-C In) Output Line Audio: Main In (HDMI/USB-C In) Output Dante Audio: Main In (HDMI/USB-C In) | |
| r output x audio | Get output (x=0~3) audio source x=0: all outputs (HDMI/HDBT, Line, Dante) x=1: HDMI/HDBT Out x=2: Line Out x=3: Dante Out | r output 1 audio | Output HDMI/HDBT Audio: Main In (HDMI/USB-C In) | |
| s input x audio vol+ | Increase input (x=0~3) audio volume x=0: all inputs (HDMI/USB-C, Line, Dante) x=1: Main In (HDMI/USB-C In) x=2: Line In x=3: Dante In | s input 1 audio vol+ | Input Main In (HDMI/USB-C In) Audio Volume: 50 | |
| s input x audio vol- | Decrease input (x=0~3) audio volume x=0: all inputs (HDMI/USB-C, Line, Dante) x=1: Main In (HDMI/USB-C In) x=2: Line In x=3: Dante In | s input 1 audio vol- | Input Main In (HDMI/USB-C In) Audio Volume: 50 | |
| s input x audio vol y | Set input (x=0~3) audio volume value (y=0~100) x=0: all inputs (HDMI/USB-C, Line, Dante) x=1: Main In (HDMI/USB-C In) x=2: Line In x=3: Dante In | s input 1 audio vol 50 | Input Main In (HDMI/USB-C In) Audio Volume: 50 | |
| r input x audio vol | Get input (x=0~3) audio volume value x=0: all inputs (HDMI/USB-C, Line, Dante) x=1: Main In (HDMI/USB-C In) x=2: Line In x=3: Dante In | r input 1 audio vol | Input Main(HDMI/USB-C In) Audio Volume: | |
| s input x audio mute y | Set input (x=0~3) audio mute on/off (y=0~1) x=0: all inputs (HDMI/USB-C, Line, Dante) x=1: Main In (HDMI/USB-C In) x=2: Line In x=3: Dante In y=0: mute off y=1: mute on | s input 0 audio mute 1 | Input Main(HDMI/USB-C In) Audio Mute: On Input Line Audio Mute: On Input Dante Audio Mute: On | |
| r input x audio mute | Get input (x=0~3) audio mute on/off x=0: all inputs (HDMI/USB-C, Line, Dante) x=1: Main In (HDMI/USB-C In) x=2: Line In x=3: Dante In | r input 0 audio mute | Input Main (HDMI/USB-C In) Audio Mute: On Input Line Audio Mute: On Input Dante Audio Mute: On | |
| s master member x y z | Set master output member (x/y/z=0~1) x=0: Exclude HDMI/HDBT Out x=1: Include HDMI/HDBT Out y=0: Exclude Line Out y=1: Include Line Out z=0: Exclude Dante Out z=1: Include Dante Out | s master member 1 1 1 | Master Member: 111 | |
| r master member | Get master output member | r master member | Master Member: 111 | |
| s master audio vol+ | Increase master output audio volume | s master audio vol+ | Master Audio Volume: 50 | |
| s master audio vol- | Decrease master output audio volume | s master audio vol- | Master Audio Volume: 50 | |
| s master audio vol x | Set master output audio volume value (x=0~100) | s master audio vol 50 | Master Audio Volume: 50 | |
| r master audio vol | Get master output audio volume value | r master audio vol | Master Audio Volume: 50 | |
| s master audio mute x | Set master output audio mute on/off (x=0~1) x=0: mute off x=1: mute on | s master audio mute 1 | Master Audio Mute: On | |
| r master audio mute | Get master output audio mute on/off status | r master audio mute | Master Audio Mute: On | |
| s output x audio vol+ | Increase output (x=0~3) audio volume x=0: all outputs (HDMI/HDBT, Line, Dante) x=1: HDMI/HDBT Out x=2: Line Out x=3: Dante Out | s output 1 audio vol+ | Output HDMI/HDBT Audio Volume: 50 | |
| s output x audio vol- | Decrease output (x=0~3) audio volume x=0: all outputs (HDMI/HDBT, Line, Dante) x=1: HDMI/HDBT Out x=2: Line Out x=3: Dante Out | s output 1 audio vol+ | Output HDMI/HDBT Audio Volume: 50 | |
| s output x audio vol y | Set output (x=0~3) audio volume value (y=0~100) x=0: all outputs (HDMI/HDBT, Line, Dante) x=1: HDMI/HDBT Out x=2: Line Out x=3: Dante Out | s output 1 audio vol 50 | Output HDMI/HDBT Audio Volume: 50 | |
| r output x audio vol | Get output (x=0~3) audio volume value x=0: all outputs (HDMI/HDBT, Line, Dante) x=1: HDMI/HDBT Out x=2: Line Out x=3: Dante Out | r output 1 audio vol | Output HDMI/HDBT Audio Volume: 50 | |
| s output x audio mute y | Set output (x=0~3) audio mute on/off (y=0~1) x=0: all outputs (HDMI/HDBT, Line, Dante) x=1: HDMI/HDBT Out x=2: Line Out x=3: Dante Out y=0: mute off y=1: mute on | s output 0 audio mute 1 | Output HDMI/HDBT Audio Mute: On Output Line Audio Mute: On Output Dante Audio Mute: On | |
| r output x audio mute | Get output (x=0~3) audio mute on/off x=0: all outputs (HDMI/HDBT, Line, Dante) x=1: HDMI/HDBT Out x=2: Line Out x=3: Dante Out | r output 0 audio mute | Output HDMI/HDBT Audio Mute: On Output Line Audio Mute: On Output Dante Audio Mute: On | |
| s output x audio mix y | Set output (x=0~3) audio mix (y=1~4) x=0: all outputs (HDMI/HDBT, Line, Dante) x=1: HDMI/HDBT Out x=2: Line Out x=3: Dante Out y=1: Stereo y=2: Left y=3: Right y=4: Left and Right | s output 0 audio mix 1 | Output HDMI/HDBT Audio Mix: Stereo Output Line Audio Mix: Stereo Output Dante Audio Mix: Stereo | |
| r output x audio mix | Get output (x=0~3) audio mix mode x=0: all outputs (HDMI/HDBT, Line, Dante) x=1: HDMI/HDBT Out x=2: Line Out x=3: Dante Out | r output 0 audio mix | Output HDMI/HDBT Audio Mix: Stereo Output Line Audio Mix: Stereo Output Dante Audio Mix: Stereo | |
| s output x audio delay y | Set output (x=0~3) audio delay (y=0~50) x=0: all outputs (HDMI/HDBT, Line, Dante) x=1: HDMI/HDBT Out x=2: Line Out x=3: Dante Out y=[0~50]: Delay Time, Millisecond | s output 0 audio delay 50 | Output HDMI/HDBT Audio Delay: 50ms Output Line Audio Delay: 50ms Output Dante Audio Delay: 50ms | |
| r output x audio delay | Get output (x=0~3) audio delay value x=0: all outputs (HDMI/HDBT, Line, Dante) x=1: HDMI/HDBT Out x=2: Line Out x=3: Dante Out | r output 0 audio delay | Output HDMI/HDBT Audio Delay: 50ms Output Line Audio Delay: 50ms Output Dante Audio Delay: 50ms |
RS-232 Commands69 commandsActive
ConnectionBaud rate: 115200/57600/56000/38400/19200/9600/4800/2400 Data bits: 7/8 Parity: n (None) /o(Odd) /e(Even) Stop bits: 1/2↓ CSV
Source: manual, chapter RS-232 Control Command, page 39
| Command | Description | Example | Response | |
|---|---|---|---|---|
| r output x audio delay | Get output (x=0~3) audio delay value | x=0: all outputs (HDMI/HDBT, Line, Dante) x=1: HDMI/HDBT Out x=2: Line Out x=3: Dante Out | Output HDMI/HDBT Audio Delay: 50ms Output Line Audio Delay: 50ms Output Dante Audio Delay: 50ms | ||
| s output x audio eq y val z | Set output (x=0~3) audio GEQ Index (y=1~31) to value (z=0~20) | x=0: all outputs (HDMI/HDBT, Line, Dante) x=1: HDMI/HDBT Out x=2: Line Out x=3: Dante Out y=[1~31]: EQ Index z=[0~20]: EQ Value | s output 0 audio eq 1 val 20 | Output HDMI/HDBT Audio EQ Index 1 to Value 20 Output Line Audio EQ Index 1 to Value 20 Output Dante Audio EQ Index 1 to Value 20 Output Dante Audio EQ Preset is Flat Mode | |
| r output x audio eq y val | Get output (x=0~3) audio GEQ Index (y=1~31) value | x=0: all outputs (HDMI/HDBT, Line, Dante) x=1: HDMI/HDBT Out x=2: Line Out x=3: Dante Out y=[1~31]: EQ Index | r output 0 audio eq 1 val | Output HDMI/HDBT Audio EQ Index 1 to Value 20 Output Line Audio EQ Index 1 to Value 20 Output Dante Audio EQ Index 1 to Value 20 | |
| s output x audio eq preset y | Set output (x=0~3) audio GEQ to preset (y=1~6) | x=0: all outputs (HDMI/HDBT, Line, Dante) x=1: HDMI/HDBT Out x=2: Line Out x=3: Dante Out y=1: Flat y=2: Custom1 y=3: Custom2 y=4: Custom3 y=5: Custom4 y=6: Custom5 | s output 0 audio eq preset 1 | Output HDMI/HDBT Audio EQ Preset 1 Output Line Audio EQ Preset 1 Output Dante Audio EQ Preset 1 | |
| r output x audio eq preset | Get output (x=0~3) audio GEQ preset | x=0: all outputs (HDMI/HDBT, Line, Dante) x=1: HDMI/HDBT Out x=2: Line Out x=3: Dante Out | r output 0 audio eq preset | Output HDMI/HDBT Audio EQ Preset 1 Output Line Audio EQ Preset 1 Output Dante Audio EQ Preset 1 | |
| s output x audio eq reset | Set output (x=0~3) audio GEQ reset | x=0: all outputs (HDMI/HDBT, Line, Dante) x=1: HDMI/HDBT Out x=2: Line Out x=3: Dante Out | s output 0 audio eq reset | Output HDMI/HDBT Audio EQ Reset Output Line Audio EQ Reset Output Dante Audio EQ Reset | |
| s auto switch x | Enable/disable auto switch feature (x=0~1) | x=0: Disable auto switch x=1: Enable auto switch | s auto switch 0 | Auto Switch: Off | |
| r auto switch | Get auto switch feature | r auto switch | Auto Switch: Off | |
| s input source x | Route input source to output (x=1~5) | x=1: USB-C 1 x=2: USB-C 2 x=3: HDMI 3 x=4: HDMI 4 x=5: HDMI 5 | s input source 1 | Input Source: USB-C 1 | |
| r input source | Get output selected input source | r input source | Input Source: USB-C 1 | |
| s fallback input x | Set fallback input source (x=0~5) | x=0: Next Input x=1: USB-C 1 x=2: USB-C 2 x=3: HDMI 3 x=4: HDMI 4 x=5: HDMI 5 | s fallback input 0 | Fallback Input: Next Input | |
| r fallback input | Get fallback input source | r fallback input | Fallback Input: Next Input | |
| s multiview x | Set multiview display mode (x=1~5) | x=1: Single x=2: PIP x=3: PBP x=4: Triple x=5: Quad | s multiview 1 | Multiview: Single | |
| r multiview | Get multiview display mode | r multiview | Multiview: Single | |
| s window x in y | Set window (x=0~4) source from (y=1~5) | x=0: All Windows x=1: Window 1 x=2: Window 2 x=3: Window 3 x=4: Window 4 y=1: USB-C 1 y=2: USB-C 2 y=3: HDMI 3 y=4: HDMI 4 y=5: HDMI 5 | s window 1 in 1 | Window 1 in USB-C 1 | |
| r window x in | Get window (x=0~4) source | x=0: All Windows x=1: Window 1 x=2: Window 2 x=3: Window 3 x=4: Window 4 | r window 0 in | Window 1 in USB-C 1 Window 2 in USB-C 2 Window 3 in HDMI 3 Window 4 in HDMI 4 | |
| s PIP position x | Set PIP window position (x=1~4) | x=1: Left Top x=2: Left Bottom x=3: Right Top x=4: Right Bottom | s PIP position 4 | PIP Position: Right Bottom | |
| r PIP position | Get PIP window position | r PIP position | PIP Position: Right Bottom | |
| s PIP size x | Get PIP window size (x=1~3) | x=1: Small x=2: Medium x=3: Large | s PIP size 3 | PIP Size: Large | |
| r PIP size | Get PIP window size | r PIP size | PIP Size: Large | |
| s PBP mode x | Set PBP windows display mode (x=1~2) | x=1: PBP Mode 1 x=2: PBP Mode 2 | s PBP mode 1 | PBP Mode: Mode 1 | |
| r PBP mode | Get PBP windows display mode | r PBP mode | PBP Mode: Mode 1 | |
| s PBP aspect x | Set PBP windows display aspect ratio (x=1~2) | x=1: Full screen x=2: 16:9 | s PBP aspect 1 | s PBP aspect 1 | |
| r PBP aspect | Get PBP windows display aspect ratio | r PBP aspect | PBP Aspect: Full Screen | |
| s triple mode x | Set triple windows display mode (x=1~2) | x=1: Triple Mode 1 x=2: Triple Mode 2 | s triple mode 1 | Triple Mode: Mode 1 | |
| r triple mode | Get triple windows display mode | r triple mode | Triple Mode: Mode 1 | |
| s triple aspect x | Set triple windows display aspect ratio (x=1~2) | x=1: Full screen x=2: 16:9 | s triple aspect 1 | Triple Aspect: Full Screen | |
| r triple aspect | Get triple windows display aspect ratio | r triple aspect | Triple Aspect: Full Screen | |
| s quad mode x | Set quad windows display mode (x=1~2) | x=1: Quad Mode 1 x=2: Quad Mode 2 | s quad mode 1 | Quad Mode: Mode 1 | |
| r quad mode | Get quad windows display mode | r quad mode | Quad Mode: Mode 1 | |
| s quad aspect x | Set quad windows display aspect ratio (x=1~2) | x=1: Full screen x=2: 16:9 | s quad aspect 1 | Quad Aspect: Full Screen | |
| r quad aspect | Get quad windows display aspect ratio | r quad aspect | Quad Aspect: Full Screen | |
| s window x border y | Set the border(y=0~9) mode of the specified window (x=0~4) | x=0: All x=1: Window 1 x=2: Window 2 x=3: Window 3 x=4: Window 4 y=0: Off y=1: Black y=2: Red y=3: Green y=4: Blue y=5: Yellow y=6: Magenta y=7: Cyan y=8: White y=9: Gray | s window 0 border 0 | Window 1 Border: Off Window 2 Border: Yellow Window 3 Border: Off Window 4 Border: Cyan | |
| r window x border | Get the border mode of the specified window (x=0~4) | x=0: All x=1: Window 1 x=2: Window 2 x=3: Window 3 x=4: Window 4 | r window 0 border | Window 1 Border: Off Window 2 Border: Yellow Window 3 Border: Off Window 4 Border: Cyan | |
| s rx input x | Set RX input source (x=1~2) | x=1: HDBT IN x=2: HDMI IN | s rx input 1 | RX Input: HDBT Error,RX not ready! | |
| r rx input | Get RX input source | r rx input | RX Input: HDBT | |
| r rx hdmi5v | Get RX HDMI input power 5V | r rx hdmi5v | RX HDMI 5V: 1 | |
| r rx host5v | Get RX USB host power 5V | r rx host5v | RX Host 5V: 1 | |
| s rx auto switch mode x | Set RX Auto Switch detection mode (x=1~2) | x=1: TMDS x=2: 5V | s rx auto switch mode 1 | RX Auto Switch Mode: TMDS | |
| r rx auto switch mode | Get RX Auto Switch detection mode | r rx auto switch mode | RX Auto Switch Mode: TMDS | |
| s rx auto switch x | Set RX Auto Switch on/off (x=0~1) | x=0: Off x=1: On | s rx auto switch 1 | RX Auto Switch: On | |
| r rx auto switch | Get RX Auto Switch on/off | r rx auto switch | RX Auto Switch: On | |
| s cec power on | Set CEC power on command | s cec power on | CEC Power On | |
| s cec power off | Set CEC power off command | s cec power off | CEC Power Off | |
| s auto power feature x | Set display auto power feature on/off (x=0~1) | x=0: Off x=1: On | s auto power feature 1 | Auto Power Feature: On | |
| r auto power feature | Get display auto power feature on/off status | r auto power feature | Auto Power Feature: On | |
| s auto power off timer x | Set auto power off command (CEC/RS-232) will be sent out after x (x=1~6) | x=1: 5 sec x=2: 10 sec x=3: 30 sec x=4: 1 min x=5: 5 min x=6: 10 min | s auto power off timer 4 | Auto Power Off Timer: 1 min | |
| r auto power off timer | Get auto power off timer | r auto power off timer | Auto Power Off Timer: 1 min | |
| s auto power control x | Set auto power feature control via (x=1~3) | x=1: CEC x=2: RS-232 x=3: CEC and RS-232 | s auto power control 1 | Auto Power Control: CEC | |
| r auto power control | Get auto power feature control type | r auto power control | Auto Power Control: CEC | |
| s UsbSwitchMode x | Set USB switch mode (x=1~3) | x=1: Auto mode (detect USB 5V then switch) x=2: Manual mode x=3: Follow video (HDMI 3 bind with USB Host 3) | s UsbSwitchMode 1 | UsbSwitchMode: Auto mode | |
| r UsbSwitchMode | Get USB switch mode | r UsbSwitchMode | UsbSwitchMode: Auto mode | |
| s UsbManual x | Set USB manual switch (x=1~3) | x=1: USB-C 1 x=2: USB-C 2 x=3: USB Host 3 | s UsbManual 3 | UsbManual: USB Host 3 | |
| r UsbSwitchStatus | Get USB switch status | r UsbSwitchStatus | UsbSwitchStatus: USB-C 1 | |
| s serial x setting y | Set serial port (x=0~2) setting to y | x=0: All RS-232 (Local and HDBT) x=1: Local RS-232 x=2: HDBT RS-232 y= 115200-8n1 Baud rate: 115200/57600/56000/38400/19200/9600/4800/2400 Data bits: 7/8 Parity: n (None) /o(Odd) /e(Even) Stop bits: 1/2 | s serial 0 setting 115200-8n1 | Local RS-232: 115200-8n1 HDBT RS-232: 115200-8n1 | |
| r serial x setting | Get serial port (x=0~2) setting | x=0: All RS-232 (Local and HDBT) x=1: Local RS-232 x=2: HDBT RS-232 | r serial 0 setting | Local RS-232: 115200-8n1 HDBT RS-232: 115200-8n1 | |
| s preset save x | Save the current unit’s settings to the specified preset (x=1~5) All settings except network setting. x=1: Preset 1 x=2: Preset 2 x=3: Preset 3 x=4: Preset 4 x=5: Preset 5 | s preset save 1 | Preset Save: Preset 1 | |
| s preset recall x | Recall a specified preset into unit (x=1~5) All settings except network setting. x=1: Preset 1 x=2: Preset 2 x=3: Preset 3 x=4: Preset 4 x=5: Preset 5 | s preset recall 1 | Preset Recall: Preset 1 | |
| s preset clear x | Clear a specified preset into unit (x=1~5) All settings except network setting. x=1: Preset 1 x=2: Preset 2 x=3: Preset 3 x=4: Preset 4 x=5: Preset 5 | s preset clear 1 | Preset Clear: Preset 1 | |
| s preset x name y | Set preset (x=1~5) name to y (16 characters max) x=1: Preset 1 x=2: Preset 2 x=3: Preset 3 x=4: Preset 4 x=5: Preset 5 | s preset 1 name MeetingRoom 1 | Preset 1 Name: MeetingRoom 1 | |
| r preset x name | Get preset (x=1~5) name x=1: Preset 1 x=2: Preset 2 x=3: Preset 3 x=4: Preset 4 x=5: Preset 5 | r preset x name | Preset 1 Name: MeetingRoom 1 | |
| r ipconfig | Get the Current IP Configuration | r ipconfig | IP Mode: DHCP IP: 192.168.62.106 Subnet Mask: 255.255.255.0 Gateway: 192.168.62.1 TCP/IP port: 4001 Telnet port: 23 MAC: 6C:DF:FB:0C:B3:8E (Static: 169.254.100.200 255.255.0.0 169.254.100.1) default static IP is 192.168.0.178/255.255.0.0/192.168.0.1 | |
| r mac addr | Get network MAC address | r mac addr | MAC: 6C:DF:FB:0C:B3:8E | |
| s ip mode x | Set network IP mode to static IP or DHCP (x=0~1) x=0: Static x=1: DHCP | s ip mode 0 | IP mode: Static (Please use "s net reboot!" command or repower device to apply new config!) | |
| r ip mode | Get network IP mode | r ip mode | IP mode: DHCP | |
| s ip addr xxx.xxx.xxx.xxx | Set network IP address | s ip addr 192.168.1.178 | IP address: 192.168.1.178 (Please use "s net reboot!" command or repower device to apply new config!) DHCP on, Device can't config static address, set DHCP off first. | |
| r ip addr | Get network IP address | r ip addr | IP: 192.168.62.106 | |
| s subnet xxx.xxx.xxx.xxx | Set network subnet mask | s subnet 255.255.255.0 | Subnet Mask: 255.255.255.0 (Please use "s net reboot!" command or repower device to apply new config!) DHCP on, Device can't config subnet mask, set DHCP off first. | |
| r subnet | Get network subnet mask | r subnet | Subnet Mask: 255.255.255.0 |
RS-232 Control Command13 commandsActive
Source: manual, chapter RS-232 Control Command, page 47
| Command | Description | Example | Response | |
|---|---|---|---|---|
| s subnet xxx.xxx.xxx.xxx | Set network subnet mask | s subnet 255.255.255.0 | Subnet Mask: 255.255.255.0 (Please use "s net reboot!" command or repower device to apply new config!) DHCP on, Device can't config subnet mask, set DHCP off first. | |
| r subnet | Get network subnet mask | r subnet | Subnet Mask: 255.255.255.0 | |
| s gateway xxx.xxx.xxx.xxx | Set network gateway | s gateway 192.168.1.1 | Gateway: 192.168.1.1 (Please use "s net reboot!" command or repower device to apply new config!) DHCP on, Device can't config gateway, set DHCP off first. | |
| r gateway | Get network gateway | r gateway | Gateway: 192.168.1.1 | |
| s tcp/ip port x | Set network TCP/IP port (x=1~65535) | s tcp/ip port 4001 | TCP/IP port: 4001 | |
| r tcp/ip port | Get network TCP/IP port | r tcp/ip port | TCP/IP port: 4001 | |
| s telnet port x | Set network telnet port (x=1~65535) | s telnet port 23 | Telnet port: 23 | |
| r telnet port | Get network telnet port | r telnet port | Telnet port: 23 | |
| s net reboot | Reboot network modules | s net reboot | Search for IP, Please wait ...! IP Mode: DHCP IP: 192.168.62.106 Subnet Mask: 255.255.255.0 Gateway: 192.168.62.1 TCP/IP port: 4001 Telnet port: 23 MAC: C:DF:FB:0C:B3:8E (Static: 169.254.100.200 255.255.0.0 169.254.100.1) | |
| s admin password x | Set admin login password (x=[16 characters max]) | s admin password admin | admin password: admin | |
| r admin password | Get admin login password | r admin password | admin password: admin | |
| s user password x | Set user login password (x=[16 characters max]) | s user password user | user password: user | |
| r user password | Get user login password | r user password | user password: user |