Safety Precautions

• Unpack the equipment carefully and save the original box and packing material for possible future shipment
• Follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
• Do not dismantle the housing or modify the module. It may result in electrical shock or burn.
• Using supplies or parts not meeting the products’ specifications may cause damage, deterioration or malfunction.
• Refer all servicing to qualified service personnel.
• To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water.
• Do not put any heavy items on the extension cable in case of protrusion.
• Do not remove the housing of the device as opening or removing the housing may expose you to dangerous voltage or other hazards.
• Install the device in a place with sufficient ventilation to avoid damage caused by overheat.
• Keep the module away from liquids.
• Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on to the housing, unplug the module immediately.
• Do not twist or pull by force ends of the optical cable. It can cause malfunction.
• Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
• Unplug the power cord when left unused for a long period of time.
• Information on disposal for scrapped devices: do not burn or mix with general household waste, please treat them as normal electrical wastes.

Product Introduction

Thanks for choosing the 4K 1x2 DisplayPort Splitter, which can distribute one DP input to two outputs. The splitter supports DP video resolution up to 4K@60Hz 4:4:4 and multi-stream transport (MST) feature. Besides, SST mode is used for both connected displays show the same contents. It is ideal for PC/notebooks, docking stations, hub, 4K2K TVs, daisy chain monitors, digital signage.

Features

• Simultaneously displays one DisplayPort source to two displays.
• DisplayPort 1.2a, 21.6Gbps.
• HDCP 1.3 compliant.
• Supports resolutions up to 4K@60Hz, HBR2 link rate.
• Supports the multi-stream transport (MST) feature.
• SST mode is used for both connected displays show the same contents.
• Ideal for PC/notebooks, docking stations, hub, 4K2K TVs, daisy chain monitors, digital signage.

Packing List

• 1x 4K 1x2 DisplayPort Splitter
• 1x Power Adapter (5V DC 1A)
• 1x User Manual
• 2x Mounting Ears

Note: Please contact your distributor immediately if any damage or defect in the components is found.

Panel Description

• POWER LED: The LED illuminates red when power is applied.
• DC 5V: DC barrel port to connect an AC power adapter.
• INPUT: DisplayPort input port to connect DP video source device.
• OUTPUTS: Two DisplayPort output ports to connect DP video display devices.

Technical Specification

System Connection

The following diagram illustrates the typical input and output connection of the splitter:

Under the MST mode

Note: Output resolution: 1. two output ports support 4K@30Hz (Max) simultaneously; 2. one output port supports 4K@60 Hz, another output port only supports 2K.
Under the MST mode, it does not support MAC Computer as input source device. When GPU as input source device, only one of output port supports audio.

Under the SST mode

Note: Only under the SST mode, SPDIF (192K 7.1ch) audio can be used.
Under the SST mode, When GPU as input source device, only one of output port supports audio. When MAC Computer as input source device, both of output ports support audio.

Panel Drawing

DC 5V
71.00 mm
61.00 mm
21.00 mm

1x2 Splitter
4K (60Hz 4:4:4) with MST support
PT-SP-DP12

After-Sales Service

If there appear some problems when running the product, please check and deal with the problems referring to this user manual. Any transport costs are borne by the users during the warranty period.

1. Product Limited Warranty : The product will be free from defects in materials and workmanship for two years (The purchase invoice shall prevail). Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the unit is within the Warranty period must be presented to obtain warranty service.
2. What the warranty does not cover (servicing available for a fee) :
3. Technical Support : For any questions or problems, contact your distributor or reseller and tell them the respective product name and version, the detailed failure situation as well as the formation of the cases.

• Warranty expiration.
• Factory applied serial number has been altered or removed from the product.
• Damage, deterioration or malfunction caused by:
• Normal wear and tear.
• Use of supplies or parts not meeting our specifications.
• No certificate or invoice as the proof of warranty.
• The product model shown on the warranty card does not match with the model of the product for repairing or had been altered.
• Damage caused by force majeure.
• Servicing not authorized by distributor.
• Any other causes which does not relate to a product defect.
• Delivery, installation or labor charges for installation or setup of the product.

Asking for Assistance

Technical Support

Phone: +49 5971 800299 - 0
Fax: +49 5971 800299 – 99

Technical Support Hours:
8:30 AM to 5:00 PM Monday thru Thursday
8:30 AM to 4:00 PM Friday

Write to:
PureLink GmbH
Von-Liebig-Straße 10
D - 48432 Rheine
www.purelink.de
info@purelink.de

Legal & Compliance

Product identification

Model: PT-SP-DP12 – manual version 1.0

Trademarks and disclaimer

Product model and logo are trademarks. All other company and product names mentioned are trademarks of their respective owners. All rights reserved. No part of this publication may be copied or reproduced without prior written permission. We reserve the right to make changes to the device, packaging or manual and accept no liability for misprints.

EU conformity

PureLink hereby declares that this product PureTools PT-SP-DP12 complies with Directives 1907/2006/EU und 2011/65/EU. PureLink GmbH hereby declares that this product PureTools PT-SP-DP12 complies with Directives 2014/30/EU and 2014/35/EU.

The full text of the EU Declaration of Conformity is available at: http://www.purelink.de/ce/4251364721469_CE.pdf

FCC

Statement This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. It has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial installation.

Disposal of electrical and electronic equipment

WEEE reg. no.: DE 93847290

The crossed-out wheelie bin symbol on the product, packaging or in this manual means that electrical and electronic equipment must not be disposed of with household waste at the end of its life. Hand in old devices free of charge at a public collection point or return them to a distributor obliged to take them back. Remove batteries and lamps that can be removed without destroying the device before handing it in, and delete any personal data stored on the device. Details are regulated by national law. By returning old devices you help protect the environment.

Packaging

Dispose of packaging separately by material (paper/cardboard, plastics) via the local collection systems. Keep packaging material away from children – risk of suffocation. Packaging register LUCID: DE5958616449295.