Discontinued
PT-SP-HD116DA
1x16 4K 18Gbps HDMI Splitter with Scaler and Audio De-Embedding
The 1x16 4K 18Gbps HDMI Splitter with Scaler and Audio De-Embedding is an HDMI 2.0 splitter featuring 1 HDMI input and 16 HDMI outputs, supporting UltraHD 4K 60Hz (4:4:4) including HDR10 and Dolby Vision at 18Gbps, and …
ManualControl (TCP/IP)FirmwareCEAvailable control interfaces. Expand an active type to see the full command table.
No matching commands.
RS232 Commands16 commandsActive
ConnectionRS232 Communication Protocol Baud rate: 9600 Data bit: 8 Stop bit: 1 Parity bit: none↓ CSV
Source: manual, chapter RS232 Communication Commands, page 18
| Command | Description | Example | Response | |
|---|---|---|---|---|
| >GetFirewareVersion | Get firmware version. | <V1.0.0 | ||
| >SetFactoryReset | Reset to factory default. | <FactoryReset_True | ||
| >SetReboot | System reboot. | <Reboot_EN | ||
| >SetHelp [Param] | Get the command details. [Param]= Any command. | >SetHelp SetHdcpActiveMode | <Set the HDCP bypass from SRC or SINK | |
| >SetHdcpActiveMode Param | Param = Src,Sink Src - Active by src Sink - Active by Sink | |||
| >SetUpdateEdid | Upload user-defined EDID. The EDID DIP switch must be set as “1111”. | <User edid ready,Please send edid data in 10s. / <SetUpdateEdid_True/False / <Time out to send edid | ||
| >SetInPortEdid [Param] | Set the EDID to [Param]. [Param]=0~7. 0 - BYPASS 1 - 1920x1080@60 8bit Stereo 2 - 1920x1080@60 8bit High Definition Audio 3 - 3840x2160@30Hz 8bit Stereo Audio 4 - 3840x2160@30Hz Deep Color High Definition Audio 5 - 3840x2160@60Hz Deep Color Stereo Audio 6 - 3840x2160@60Hz Deep Color HDR LPCM 6CH 7 - USER EDID The EDID DIP switch should be set as “1111”. | >SetInPortEdid 0 <InPortEdid 0 | ||
| >GetInPortEdid | Get the EDID. | <InPortEdid 0 | ||
| >SetHdcpActiveMode [Param] | Set the HDCP active mode. [Param]= Src, Sink Src - Active by Src. Follow source. Sink - Active by Sink. Follow display. Note: The EDID switch must be switched to “1111” before sending the command. | >SetHdcpActiveMode Src <HdcpActiveMode Src | ||
| >GetHdcpActiveMode | Get the HDCP active mode. | <HdcpActiveMode Src | ||
| >SetVideoOutput | Enable or disable video output. | >SetVideoOutput 1,EN [Param1],[Param2] [Param1]=1~16. Output port. [Param2]= EN, Dis Dis - Disable En - Enable | ||
| >GetVideoOutput [Param] | [Param]=1~16.Output port. | >GetVideoOutput 1 <VideoOutput 1 True | ||
| >SetAutoDownScaler [Param] | Enable/disable 4K to 1080p down-scaling function. [Param]= EN, Dis Dis - Disable En - Enable | >SetAutoDownScaler EN <AutoDownScaler True | ||
| >GetAutoDownScaler | Get the on-off status of down-scaling function. | <AutoDownScaler True | ||
| >SetRS232Baudrate [Param] | Set the baud rate to [Param]. [Param]=1~7 1 - 115200 2 - 57600 3 - 38400 4 - 19200 5 - 9600 6 - 4800 7 - 2400 | >SetRS232Baudrate 1 <RS232Baudrate 1 | ||
| >GetRS232Baudrate | Get the RS232 baud rate. | <RS232Baudrate 1 |