Active
PT-SW-HD41-48G
4x1 HDMI 2.1 Switcher - 48Gbps
The PT-SW-HD41-48G is a professional-grade 4x1 HDMI switcher supporting the full HDMI 2.1 feature set with 48Gbps FRL bandwidth, capable of switching sources up to 8K 60Hz or 4K 120Hz. It handles up to 12bit colour …
ManualControl (TCP/IP)FAQSpecificationsDatasheetCEAvailable control interfaces. Expand an active type to see the full command table.
No matching commands.
RS-232 Commands22 commandsActive
Source: manual, chapter API Commands, page 15
| Command | Description | Example | Response | |
|---|---|---|---|---|
| help! | List all commands | help! | ||
| r type! | Get device model | r type! | 8K 4x1 HDMI switcher | |
| r info! | Get device current status | r info! | current unit status: mcu fw version: Vx.xx.xx power status: on hdmi input1: disconnect hdmi input2: disconnect hdmi input3: disconnect hdmi input4: disconnect hdmi output1: disconnect hdmi output2: disconnect connection route: input1->output1 output 1 hdcp: user mode on hdcp dip mode: hdcp follow source cec dip mode: cec off auto switch: on earc mode: off auto switch mode: TMDS mode input edid mode: copy from output | |
| r fw version! | Get Firmware version | r fw version! | MCU FW version x.xx.xx | |
| power z! | Power on/off the device, z=0~1 (z=0 power off, z=1 power on) | power 1! | power on System Initializing... Initialization Finished! MCU FW version x.xx.xx | |
| r power! | Get current power state | r power! | power on /power off | |
| r temperature! | get temperature | r temperature! | gsv chip temperature: 47 | |
| reboot! | Reboot the device | reboot! | Reboot… System Initializing... Initialization Finished! MCU FW version x.xx.xx | |
| reset! | Reset to factory defaults | reset! | Reset to factory defaults System Initializing... Initialization Finished! MCU FW version x.xx.xx | |
| s user edid! | Upload local edid | s user edid! | Please send the edid file… edid: 1080P60, Audio 2.0CH | |
| r input edid! | Get input edid mode | r input edid! | input edid: 4K2K60_444, Stereo Audio 2.0 | |
| s auto switch x! | Enable/disable auto switch feature (x=0~1) 0. Disable auto switch 1. Enable auto switch | s auto switch 0! | auto switch off auto switch: on | |
| r auto switch! | Get auto switch feature | r auto switch! | auto switch: on | |
| s auto mode x! | set auto switch mode(x=0~1) 0.TMDS mode 1.5V mode | s auto mode 1! | auto switch mode: 5v mode auto switch mode: TMDS mode! | |
| r auto mode! | get auto switch mode | r auto switch! | auto switch mode: TMDS mode | |
| s earc x! | Enable/disable Earc function (x=0~1) 0. earc off 1. earc on | s earc 0! | earc off earc off | |
| r earc! | Get earc feature | r earc! | earc off | |
| s in source x! | Route input source to output (1~4) 1. HDMI 1 2. HDMI 2 3. HDMI 3 4. HDMI 4 | s in source 1! | output->input1 input 1 | |
| r in source! | Get output selected input source | r in source! | output->input1 | |
| s output hdcp x! | set user mode on/off (x=0~1) | s output hdcp 0! | output: user mode on user mode off | |
| r output hdcp! | get output hdcp status | r output hdcp! | output: user mode off | |
| s baud rate z! | set rs232 serial port baud rate (z=115200, 57600, 38400, 19200, 9600, 4800, 2400) | s baud rate 115200! | set the baud rate to 115200 baud rate: 115200 |