Discontinued
PT-SW-HD41UHD
PureTools - HDMI Switcher 4x1, 4K (60Hz 4:4:4), Auto-Switching
The PureTools HDMI Switcher 4x1, 4K (60Hz 4:4:4), Auto-Switching is a switcher with 4 HDMI inputs and 1 HDMI output, supporting resolutions up to 4K at 60Hz with 4:4:4 chroma subsampling. It offers auto-switching …
ManualControl (TCP/IP)FAQSpecificationsCEAvailable control interfaces. Expand an active type to see the full command table.
No matching commands.
RS232 Command39 commandsActive
Source: manual, chapter RS232 Command
| Command | Description | Response | |
|---|---|---|---|
| HDMI1% | Switch to HDMI input 1. | [CMD]: switch to HDMI1. | |
| HDMI2% | Switch to HDMI input 2. | [CMD]: switch to HDMI2. | |
| HDMI3% | Switch to HDMI input 3. | [CMD]: switch to HDMI3. | |
| HDMI4% | Switch to HDMI input 4. | [CMD]: switch to HDMI4. | |
| AUTO% | Enable auto-switching mode. | [CMD]: switch to AUTO Mode. | |
| MANUAL% | Enable manual switching mode. | [CMD]: switch to MANUAL Mode. | |
| EDIDInfo% | Query the current EDID | ||
| EDIDSxx% | Customize EDID. | ||
| EDIDR% | Remove all customized EDID. | ||
| SRCOn% | Turn on the input source device, e.g. Blue-ray DVD. | [CMD]: blue ray power on. | |
| SRCOff% | Turn off the input source device, e.g. Blue-ray DVD. | [CMD]: blue ray power off. | |
| SRCPlay% | Play | [CMD]: blue ray play. | |
| SRCPause% | Pause | [CMD]: blue ray pause. | |
| SRCStop% | Stop | [CMD]: blue ray stop. | |
| SRCForward% | Fast Forward x1 | [CMD]: blue ray forward. | |
| SRCBackward% | Fast Rewind | [CMD]: blue ray backward. | |
| SRCSkipForward% | Next Section | [CMD]: blue ray skid forward. | |
| SRCSkipBackward% | Previous Section | [CMD]: blue ray skid backward. | |
| SRCMenu% | Open the MENU | [CMD]: blue ray menu. | |
| SRCBack% | Back | [CMD]: blue ray back. | |
| SRCOk% | Confirm (OK) | [CMD]: blue ray OK. | |
| SRCExit% | Exit | [CMD]: blue ray Exit. | |
| TVOn% | Turn on the display device, e.g. HDTV. | [CMD]: TV Power on. | |
| TVOff% | Turn off the display device, e.g. HDTV. | [CMD]: TV Power off. | |
| TVINSel% | Select input source. | [CMD]: TV input select. | |
| TVVOL+% | Volume up. | [CMD]: TV VOL +. | |
| TVVOL-% | Volume down. | [CMD]: TV VOL -. | |
| TVMUTE% | Mute. | [CMD]: TV VOL Mute. | |
| UART9600% | Set the baud rate as 9600. | [CMD]: Baud 9600. | |
| UART19200% | Set the baud rate as 19200. | [CMD]: Baud 19200. | |
| UART38400% | Set the baud rate as 38400. | [CMD]: Baud 38400. | |
| UART57600% | Set the baud rate as 57600. | [CMD]: Baud 57600. | |
| UART115200% | Set the baud rate as 115200. | [CMD]: Baud 115200. | |
| SRCUp% | Up direction | [CMD]: blue ray up. | |
| SRCDown% | Down direction | [CMD]: blue ray down. | |
| SRCLeft% | Left direction | [CMD]: blue ray left. | |
| SRCRight% | Right direction | [CMD]: blue ray right. | |
| SRCNext% | Next | [CMD]: blue ray next. | |
| SRCEnter% | Enter | [CMD]: blue ray Enter. |