Set di switcher di collaborazione multiformato 2x1 4K 18 Gbps – Controllo

Fuori produzionePossibile alternativa: PT-PSW-21KVM-40G

PT-PSW-21KVM

Set di switcher di collaborazione multiformato 2x1 4K 18 Gbps

Il PT-PSW-21KVM è un set Extender di collaborazione HDBaseT 3.0 che trasmette video 4K non compresso, dati USB ed Ethernet su lunghe distanze, con ingressi HDMI e USB-C DP Alt-Mode per una connettività dispositivi …

ManualeComandi (TCP/IP)FAQAlternativa disponibileFirmwareCE

Interfacce di controllo disponibili. Espanda un tipo attivo per visualizzare la tabella completa dei comandi.

Comandi RS2321 comandiAttivo

ConnessioneBaud Rate: Supports 9600, 19200, 38400, 57600, 115200 Command Ending: NULL, CR, LF or CR+LF can be chosen.↓ CSV

Fonte: manuale, capitolo RS232 Tab, pagina 19

Comando		Descrizione	Risposta
Type the command in the box to control the third-party device which is connected to the RS232 port of the PT-PSW-21KVM.		Control the third-party device connected to the RS232 port.

Comandi RS23230 comandiAttivo

ConnessioneVelocità di trasmissione: 9600 Bit dati: 8 Bit stop: 1 Bit di parità: nessuno↓ CSV

Fonte: manuale, capitolo RS232 Command, pagina 27

Comando	Descrizione	Esempio	Risposta
PHDBTON.	HDBaseT OUT POC power on		HDBT 01 Power ON!
PHDBTOFF.	HDBaseT OUT POC power off		HDBT 01 Power OFF!
HDMIA.	Auto-switch mode on HDMI Out		HDMI Out Switch Auto Mode!
HDMIM.	Manual-switch mode on HDMI Out		HDMI Out Switch Manual Mode!
HDMI[x].	HDMI input source selection. x = 1 & 2 1 – Type-C 2 – HDMI	HDMI Out Switch To 01!	HDMI Out Switch To 01!
POWON.	Turn off standby mode		Power ON!
POWOFF.	Turn on standby mode		Power OFF!
SIGNALTRG[xx]MODE.	When setting the detection mode xx=1, it is 5V detection, and when it is 2, it is TMDS detection.		Set Trigger Mode To 5V.
SIGNALTRGSTA.	Interrogare il metodo di rilevamento del segnale (TMDS o 5V)		Get Trigger Mode Is 5V.
RST.	Ripristina impostazioni di fabbrica		Factory Default!
Lock.	Attiva il blocco del pannello frontale		Front Panel Locked!
Unlock.	Disattiva il blocco del pannello frontale		Front Panel UnLock!
STA.	Richiesta stato		PT-PSW-21KVM V1.0.0 PWON! HDBT 01 Power ON! HDMI OUT 01 Down Scale OFF! HDMI OUT 02 Down Scale OFF! HDMI Out Switch Auto Mode! Get Trigger Mode Is 5V. System Unlock! Baudrate9600! GUI_IP:192.168.0.200! HDMI Out Switch To 02! Set Output Black Screen ON! IN 1 2 LINK Y Y OUT 1 2 LINK Y Y Input 1 EDID From 1 User Define EDID! Input 2 EDID From 1 Internal EDID! OUT 01 HDCP MAT DISPLAY! OUT 02 HDCP MAT DISPLAY! Set POFF Delay To 600 Second(s)!
RS232ONSAVE:[Y],[xxx].	Save the display terminal boot command sent when the input is detected. Y is the baud rate, 1--2400; 2--4800; 3--9600; 4--19200; 5--38400; 6-57600; 7 --115200; xxx is the command data
RS232OFFSAVE:[Y],[xxx].	Save the display terminal shutdown command sent when no input is detected. Y is the baud rate, 1--2400; 2--4800; 3--9600; 4--19200; 5--38400; 6-57600; 7--115200; xxx is the command data
RS232DLYOUT[xx]:[yy].	Set the delayed sending time of the display terminal shutdown command (CEC and RS232). Send when no input is detected; the default time is 10 minutes 600s [xx]=output,00~02 [yy]=second,01~600
TVON.	Turn on TV by CEC control		CEC_TV_POWON! CEC Output 01 Send Success. CEC Output 02 Send Success.
TVOFF.	Turn off TV by CEC control		CEC_TV_POWOFF! CEC Output 01 Send Success. CEC Output 02 Send Success.
TVVOL+.	TV volume plus by CEC control		CEC_TV_VOLUP! CEC Output 01 Send Success. CEC Output 02 Send Success.
TVVOL-.	TV volume down by CEC control		CEC_TV_VOLDOWN! CEC Output 01 Send Success. CEC Output 02 Send Success.
TVMUTE.	Mute TV tramite controllo CEC		CEC_TV_VOLMUTE/UNMUTE! CEC Output 01 Send Success. CEC Output 02 Send Success.
DS[x]ON.	Turn on the DOWN SCALE of the HDMI output. (Compatible with [X]/[XX]) [x] Value 0-2 or 00-02, 0 means all output		HDMI OUT 01 Down Scale ON! HDMI OUT 02 Down Scale ON!
DS[x]OFF.	Turn off the DOWN SCALE of the HDMI output. (Compatible with [X]/[XX]) [x] Value 0-2 or 00-02, 0 means all output		HDMI OUT 01 Down Scale OFF! HDMI OUT 02 Down Scale OFF!
STA_IN.	Source connection status		IN 1 2 LINK N N
/+[X]/[YY]:XXX.	RS232 sends commands to control peripheral devices. [YY]The value is 00 or 01; [X] is 1--2400; 2--4800; 3--9600; 4--19200; 5--38400; 6-57600; 7--115200	123456
@OUT[xx].	Turn on the HDMI 5V of the output port. [xx] The value 00-01, 00 means all outputs.		Set Output Black Screen ON!
$OUT[xx].	Turn off the HDMI 5V of the output port. [xx] The value 00-01,00 means all outputs.		Set Output Black Screen OFF!
GETGUIIP.	Interrogare l'IP GUI		GUI_IP:192.168.0.173!
SetGuiIP_DHCP ON.	Dynamic DHCP		GUI IP DHCP ON!
SetGuiIP_DHCP OFF:xxx.xxx.x.xxx.	Static DHCP+set IP (default is 192.168.0.178)		GUI IP DHCP OFF!SETGUIIP:192.168.0.123!