UdgåetErstattet af PT-PSW-41H
PT-PSW-41E
4x1 4K 18 Gbps multiformat-præsentationsswitcher
PureTools 4x1 Multiformat Presentation Switcher (41E model) muliggør switching mellem 3 HDMI- og 1 DisplayPort-inputs til et enkelt HDMI-output ved brug af avanceret auto sense, frontpanel, IR eller GUI-styring. Den …
ManualStyring (TCP/IP)SpecifikationerDatabladHar efterfølgerFirmwareCETilgængelige styringsinterfaces. Udvid en aktiv type for at se den fulde kommandotabel.
Ingen matchende kommandoer.
RS232 Kommandoer1 kommandoerAktiv
ForbindelseBaud Rate: Supports 2400, 4800, 9600, 19200, 38400, 57600 or 115200.
Command Ending: NULL, CR, LF or CR+LF can be chosen.↓ CSV
Kilde: manual, kapitel RS232 Tab, side 23
| Kommando | Beskrivelse | Svar | |
|---|---|---|---|
| Type the command in this box to control the third-party device which is connected to the RS232 port of the switcher. | Control the third-party device connected to the RS232 port of the switcher. |
RS232 Kommandoer51 kommandoerAktiv
Kilde: manual, kapitel RS232 Command, side 30
| Kommando | Beskrivelse | Eksempel | Svar | |
|---|---|---|---|---|
| POWON. | Tænd systemet. | Power ON! | ||
| POWOFF. | System standby. | Power OFF! | ||
| LOCK. | Lås frontpanelknapper. | Front Panel Locked! | ||
| UNLOCK. | Lås op for frontpanelknapper. | Front Panel UnLock! | ||
| Baudrate[xxx]. | Indstil baudrate til [xxx]. xxx = 115200, 57600, 38400, 19200, 9600, 4800 eller 2400. | Example: Baudrate2400. Feedback: Set Local RS232 Baudrate Is 2400! | ||
| GETGUIIP. | Rapportér GUI IP. | GUI_IP:192.168.0.178 | ||
| SETGUIIP:[xxx.xxx.xxx.xxx]. | Indstil GUI IP til [xxx.xxx.xxx.xxx]. | Example: SETGUIIP:192.168.0.18. Feedback: SETGUIIP:192.168.0.18! | ||
| STA. | Rapportér systemstatus. | … … | ||
| RST. | Gendan fabriksindstillinger. | Factory Default! | ||
| HDMI[x]. | Skift til HDMI Input [x]. x=1~4. | HDMI4. | HDMI Out Switch To 04! | |
| HDMIA. | Aktivér automatisk skiftefunktion. | HDMI Out Switch Auto Mode! | ||
| HDMIM. | Aktivér manuel skiftefunktion. | HDMI Out Switch Manual Mode! | ||
| EDIDR[xxxx]. | Læs den forudindstillede EDID. [xxxx] repræsenterer status for den 4-polede DIP-switch. | EDID_0001! … | ||
| EDIDUSE[xxxx]. | Aktivér forudindstillet EDID. [xxxx] angiver status på 4-pin DIP-switch. Se afsnit 5.4 EDID-indstilling. Bemærk: Ved aktivering af forudindstillet EDID skal 4-pin EDID DIP-switch på bagpanelet stå i “1111”-position. | EDIDUSE0001! EDID_RS232&GUI_MODE! EDID0001! | ||
| EDIDW[xxxx]. | User-define EDID. xxxx = 1011, 1100, 1101 or 1110. Operation: Step 1: Prepare the EDID file (.bin). Step 2: Set the 4-pin DIP switch to “1111” status. Step 3: Send the command “EDIDW1101.”, and the feedback is “Please Send The EDID File!”. Step 4: Send the EDID file (.bin). If successfully upload, the feedback is: “Received The File! Length=256! EDID1101 Update OK!” | |||
| IISON. | Tænd for stereo analog L/R lydudgang. | IIS_OUT_ON! | ||
| IISOFF. | Sluk for stereo analog L/R lydudgang. | IIS_OUT_OFF! | ||
| SPDIFON. | Tænd for Toslink digital lydudgang. | SPDIF_OUT_ON! | ||
| SPDIFOFF. | Sluk for Toslink digital lydudgang. | SPDIF_OUT_OFF! | ||
| TVON. | Tænd displayet. | CEC_TV_POWON! | ||
| TVOFF. | Sluk for displayet. | CEC_TV_POWOFF! | ||
| TVVOL+. | Forøg skærmens lyd. | CEC_TV_VOLUP! | ||
| TVVOL-. | Formindsk displaylyd. | CEC_TV_VOLDOWN! | ||
| TVMUTE. | Slå display fra/til. | CEC_TV_VOLMUTE/UNMUTE! | ||
| CECI[port]00. | Bekræft handling (Enter). | CECI0100. | CECI0100. CEC_IN_01_SEND_SUCCESS! | |
| CECI[port]01. | UP. | CECI0101. | CECI0101. CEC_IN_01_SEND_SUCCESS! | |
| CECI[port]02. | NED. | CECI0102. | CECI0102. CEC_IN_01_SEND_SUCCESS! | |
| CECI[port]03. | VENSTRE. | CECI0103. | CECI0103. CEC_IN_01_SEND_SUCCESS! | |
| CECI[port]04. | HØJRE. | CECI0104. | CECI0104. CEC_IN_01_SEND_SUCCESS! | |
| CECI[port]0A. | Indtast hovedmenuen. | CECI010A. | CECI010A. CEC_IN_01_SEND_SUCCESS! | |
| CECI[port]0D. | Afslut menu. | CECI010D. | CECI010D. CEC_IN_01_SEND_SUCCESS! | |
| CECI[port]41. | Lydstyrke op. | CECI0141. | CECI0141. CEC_IN_01_SEND_SUCCESS! | |
| CECI[port]42. | Lydstyrke ned. | CECI0142. | CECI0142. CEC_IN_01_SEND_SUCCESS! | |
| CECI[port]43. | Dæmp | CECI0143. | CECI0143. CEC_IN_01_SEND_SUCCESS! | |
| CECI[port]44. | Afspil. | CECI0144. | CECI0144. CEC_IN_01_SEND_SUCCESS! | |
| CECI[port]45. | Stop. | CECI0145. | CECI0145. CEC_IN_01_SEND_SUCCESS! | |
| CECI[port]46. | Pause. | CECI0146. | CECI0146. CEC_IN_01_SEND_SUCCESS! | |
| CECI[port]48. | Spol tilbage. | CECI0148. | CECI0148. CEC_IN_01_SEND_SUCCESS! | |
| CECI[port]49. | Hurtig fremad. | CECI0149. | CECI0149. CEC_IN_01_SEND_SUCCESS! | |
| CECI[port]4B. | Fremad. | CECI014B. | CECI014B. CEC_IN_01_SEND_SUCCESS! | |
| CECI[port]4C. | Bagud. | CECI014C. | CECI014C. CEC_IN_01_SEND_SUCCESS! | |
| CECI[port]6C. | Sluk. | CECI016C. | CECI016C. CEC_IN_01_SEND_SUCCESS! | |
| CECI[port]6D. | Tænd. | CECI016D. | CECI016D. CEC_IN_01_SEND_SUCCESS! | |
| CECO[port]41. | Lydstyrke op. | CECO0141. | CECO0141. CEC_OUT_01_SEND_SUCCESS! | |
| CECO[port]42. | Lydstyrke ned. | CECO0142. | CECO0142. CEC_OUT_01_SEND_SUCCESS! | |
| CECO[port]43. | Dæmp | CECO0143. | CECO0143. CEC_OUT_01_SEND_SUCCESS! | |
| CECO[port]6C. | Sluk. | CECO016C. | CECO016C. CEC_OUT_01_SEND_SUCCESS! | |
| CEO[port]6D. | Tænd. | CECO016D. | CECO016D. CEC_OUT_01_SEND_SUCCESS! | |
| /+[B]:xxx. | xxx: ASCII-streng. “B” repræsenterer baudraten for tredjepartsenhed. B=1, baudraten er 2400 B=2, baudraten er 4800 B=3, baudraten er 9600 B=4, baudraten er 19200 B=5, baudraten er 38400 B=6, baudraten er 57600 B=7, baudraten er 115200 | /+3:123456. | Send the command “123456” to the third-party whose baud rate is 9600. | |
| CMDON/+[B]:xxx. | Tænd den tredjepartsenhed. | CMDON/+3:455665. | ||
| CMDOFF/+[B]:xxx. | Sluk den tredjepartsenhed. | CMDOFF/+3:455666. |