Aktiv
PT-SP-HD24-48G
2x4 HDMI 2.1-splitter - 48 Gbps med skalering og lydafkodning
PT-SP-HD24-48G er en 2x4 HDMI 2.1 Splitter og Switcher, der understøtter HDMI 2.1-signaler op til 48Gbps FRL, hvilket muliggør 8K ved 60Hz (4:2:0, 12bit) og 4K ved 120Hz (4:4:4, 12bit), med avanceret …
ManualStyring (TCP/IP)SpecifikationerDatabladCE-erklæring ↗Tilgængelige styringsinterfaces. Udvid en aktiv type for at se den fulde kommandotabel.
Ingen matchende kommandoer.
Serviceport (USB-C virtuel RS232)38 kommandoerAktiv
Kilde: manual, kapitel API Commands, side 15
| Kommando | Beskrivelse | Eksempel | Svar | |
|---|---|---|---|---|
| ? | Hent listen over alle kommandoer | ? | ||
| help | Hent listen over alle kommandoer | help | ||
| get fw version | Hent firmwareversion | get fw version | MCU version: 1.00.02 Chip 1 PS8419 version: 13.28 Chip 2 PS8419 version: 13.28 | |
| set power on/off | Indstil enheds tænd/sluk | set power on set power off | Power on… System Initializing... Initialization Finished! FW: 1.0.0 Power off… | |
| get power | Hent enhedens strømstatus | get power | Power on | |
| set reboot | Genstart enheden | set reboot | Reboot… System Initializing... Initialization Finished! FW: 1.0.0 | |
| set reset | Nulstil til fabriksindstillinger | set reset | Sure to RESET to default settings? Type "Yes" after next prompt to confirm… | |
| get status | Hent systemstatus | get status | Please refer to the note at the end of the list | |
| set IR on/off | Indstil IR til til/fra | set IR on set IR off | Set IR on Set IR off on | |
| get IR | Hent IR til/fra-status | get IR | IR on | |
| set key x on/off | Indstil frontpanelknap (x=0~6) til/fra x=0: Alle knapper x=1: Tænd/sluk knap x=2: Vælg knap x=3: Skærm tænd knap x=4: Skærm sluk knap x=5: Lyd ned knap x=6: Lyd op knap | set key 0 on set key 2 off | Set all key on Set select key off on | |
| get key x | Hent status for frontpanelknap (x=0~6) tændt/slukket | get key get key 0 get key 2 | All key on All key on Select key on | |
| set baud x | Indstil RS232 baudrate til x bps x=1: 4800 x=2: 9600 x=3: 19200 x=4: 38400 x=5: 57600 x=6: 115200 | set baud 6 | Set baud rate 115200 115200 | |
| get baud | Hent RS232 baud rate | get baud | Baud rate 115200 | |
| set input x | Indstil inputvideo (x=0~2) x=0: Fra x=1~2: HDMI input 1~2 | set input 1 | Set input HDMI 1 1 | |
| get input | Hent inputport | get input | Input HDMI 1 | |
| get hdmi5v | Hent input HDMI 5V | get hdmi5v | HDMI 1: 5V HDMI 2: none | |
| set autoswitch x | Indstil automatisk omskiftning til/fra (HDMI 5V detektion) x=Til, Fra | set autoswitch on | Set autoswitch on on | |
| get autoswitch | Hent auto-switching status | get autoswitch | Autoswitch on | |
| set output x downscale y | Indstil output (x=0~4) nedskaleringstilstand (y=0~1) x=0: alle outputs x=1~4: HDMI output 1~4 y=0: Automatisk efter displayets kapacitet y=1: Omgå video y=2: Tving 1080p | set output 0 downscale 0 | Set all outputs downscale auto 0 | |
| get output x downscale | Hent output (x=0~4) nedskaleringstilstand | get output 0 downscale | HDMI output 1 downscale auto HDMI output 2 downscale auto HDMI output 3 downscale auto HDMI output 4 downscale auto | |
| set output x display y | Indstil output (x=0~4) visningstilstand (y=0~3) x=0: alle outputs x=1~4: HDMI output 1~4 y=0: Fra (deaktiver TMDS output) y=1: Input video y=2: AVMUTE y=3: Intern testmønster Bemærk: Når y er 1, 2 eller 3, skal x være 0. | set output 0 display 2 | Set all outputs display internal pattern 1 | |
| get output x display | Hent output (x=0~4) visningstilstand | get output 0 display | HDMI output 1 display internal pattern HDMI output 2 display internal pattern HDMI output 3 display internal pattern HDMI output 4 display internal pattern | |
| set output x HDCP y | Indstil output (x=0~4) HDCP-tilstand (y=0~3) x=0: alle outputs x=1~4: HDMI output 1~4 y=0: Reserveret y=1: Følg sink y=2: Følg kilde y=3: Tving HDCP 1.4 y=4: Tving HDCP 2.2 | set output 0 HDCP 1 | Set all outputs HDCP follow sink 1 | |
| get output x HDCP | Hent output (x=0~4) HDCP-tilstand | get output 0 HDCP | HDMI output 1 HDCP follow sink HDMI output 2 HDCP follow sink HDMI output 3 HDCP follow sink HDMI output 4 HDCP follow sink | |
| set CEC on/off | Indstil CEC til til/fra | set CEC on set CEC off | Set CEC enable Set CEC disable Disable | |
| get CEC | Hent CEC til/fra-status | get CEC | CEC enable CEC disable | |
| set generator x y | Indstil intern signalgenerator opløsning (x=1~15) mønster (y=1~13) x=01: 8K30Hz x=02: 4K120Hz x=03: 4K100Hz x=04: 5K60Hz x=05: 5K50Hz x=06: 5K30Hz x=07: 5K25Hz x=08: 5K24Hz x=09: 4K60Hz x=10: 4K50Hz x=11: 4K25Hz x=12: 4K24Hz x=13: 1080P60Hz x=14: 480P60Hz x=15: 5760P50Hz y=01: Farvebjælke y=02: Skakternet y=03: Stribe y=04: Rød y=05: Grøn y=06: Blå y=07: Hvid y=08: Ramp y=09: Rød ramp y=10: Grøn ramp y=11: Blå ramp y=12: PRBS y=13: Sort | set generator 1 1 | Set generator 8K30Hz color bar | |
| get generator | Hent intern signalgenerator outputopløsning og mønster | get generator | Generator 8K30Hz color bar | |
| set analog mute x | Indstil analog lyd mute til/fra x=Til, Fra | set analog mute on | Set analog mute on off | |
| get analog mute | Hent analog lyd mute-status | get analog mute | off | |
| set analog gain x | Indstil analog lydstyrke (x=0dB ~ -79dB) | set analog gain -79dB | Set analog gain -79dB 0dB | |
| get analog gain | Hent analogt lydstyrke-værdi | get analog gain | Analog gain -79dB | |
| set edid x to y | Indstil inputporte (x=0~2) til EDID (y=0~41) x=0: alle input x=1~2: HDMI input 1~2 y=00: HDMI 1080p@60Hz, Audio 2CH PCM (standard) y=01: HDMI 1080p@60Hz, Audio 5.1CH DTS/DOLBY y=02: HDMI 1080p@60Hz, Audio 7.1CH DTS/DOLBY/HD y=03: HDMI 4K@60Hz 4:4:4, 8-bit, Audio 2CH PCM y=04: HDMI 4K@60Hz 4:4:4, 8-bit, Audio 5.1CH DTS/DOLBY y=05: HDMI 4K@60Hz 4:4:4, 8-bit, Audio 7.1CH DTS/DOLBY/HD y=06: HDMI 4K@120Hz 4:4:4, 8-bit, Audio 2CH PCM y=07: HDMI 4K@120Hz 4:4:4, 8-bit, Audio 5.1CH DTS/DOLBY y=08: HDMI 4K@120Hz 4:4:4, 8-bit, Audio 7.1CH DTS/DOLBY/HD y=09: HDMI 4K@120Hz 4:4:4, 10-bit HDR/DV, Audio 2CH PCM y=10: HDMI 4K@120Hz 4:4:4, 10-bit HDR/DV, Audio 5.1CH DTS/DOLBY y=11: HDMI 4K@120Hz 4:4:4, 10-bit HDR/DV, Audio 7.1CH DTS/DOLBY/HD y=32: EDID pass-through (Kopier fra Sink 1) y=33: EDID pass-through (Kopier fra Sink 2) y=34: EDID pass-through (Kopier fra Sink 3) y=35: EDID pass-through (Kopier fra Sink 4) y=36: Reserveret y=37: Reserveret y=38: Reserveret y=39: Reserveret y=40: Bruger EDID 1 y=41: Bruger EDID 2 | set edid 0 to 0 | Set all inputs EDID to SDF_00: HDMI 1080p@60Hz, Audio 2CH PCM (default) 0 | |
| get edid x | Hent inputporte EDID x=0: alle input x=1~2: HDMI input 1~2 | get edid 0 | HDMI input 1 EDID SDF_00: HDMI 1080p@60Hz, Audio 2CH PCM (default) HDMI input 2 EDID SDF_00: HDMI 1080p@60Hz, Audio 2CH PCM (default) | |
| get edid data x | Hent inputporte EDID-data x=0: alle input x=1~2: HDMI input 1~2 | get edid data 0 | HDMI input 1 EDID HDMI input 2 EDID | |
| set user edid x | Indstil brugerdefineret EDID (x=1~2) x=1: Brugerdefineret 1 x=2: Brugerdefineret 2 y = 00 FF FF FF ….. (y er 256 byte EDID-data) | set user edid 1 | User defined 1 EDID is loaded successfully | |
| get user edid x | Hent brugerdefineret EDID (x=1~2) x=1: Brugerdefineret 1 x=2: Brugerdefineret 2 | get user edid 1 | User defined 1 EDID |
Phoenix RS232-port38 kommandoerAktiv
Kilde: manual, kapitel API Commands, side 15
| Kommando | Beskrivelse | Eksempel | Svar | |
|---|---|---|---|---|
| ? | Hent listen over alle kommandoer | ? | ||
| help | Hent listen over alle kommandoer | help | ||
| get fw version | Hent firmwareversion | get fw version | MCU version: 1.00.02 Chip 1 PS8419 version: 13.28 Chip 2 PS8419 version: 13.28 | |
| set power on/off | Indstil enheds tænd/sluk | set power on set power off | Power on… System Initializing... Initialization Finished! FW: 1.0.0 Power off… | |
| get power | Hent enhedens strømstatus | get power | Power on | |
| set reboot | Genstart enheden | set reboot | Reboot… System Initializing... Initialization Finished! FW: 1.0.0 | |
| set reset | Nulstil til fabriksindstillinger | set reset | Sure to RESET to default settings? Type "Yes" after next prompt to confirm… | |
| get status | Hent systemstatus | get status | Please refer to the note at the end of the list | |
| set IR on/off | Indstil IR til til/fra | set IR on set IR off | Set IR on Set IR off on | |
| get IR | Hent IR til/fra-status | get IR | IR on | |
| set key x on/off | Indstil frontpanelknap (x=0~6) til/fra x=0: Alle knapper x=1: Tænd/sluk knap x=2: Vælg knap x=3: Skærm tænd knap x=4: Skærm sluk knap x=5: Lyd ned knap x=6: Lyd op knap | set key 0 on set key 2 off | Set all key on Set select key off on | |
| get key x | Hent status for frontpanelknap (x=0~6) tændt/slukket | get key get key 0 get key 2 | All key on All key on Select key on | |
| set baud x | Indstil RS232 baudrate til x bps x=1: 4800 x=2: 9600 x=3: 19200 x=4: 38400 x=5: 57600 x=6: 115200 | set baud 6 | Set baud rate 115200 115200 | |
| get baud | Hent RS232 baud rate | get baud | Baud rate 115200 | |
| set input x | Indstil inputvideo (x=0~2) x=0: Fra x=1~2: HDMI input 1~2 | set input 1 | Set input HDMI 1 1 | |
| get input | Hent inputport | get input | Input HDMI 1 | |
| get hdmi5v | Hent input HDMI 5V | get hdmi5v | HDMI 1: 5V HDMI 2: none | |
| set autoswitch x | Indstil automatisk omskiftning til/fra (HDMI 5V detektion) x=Til, Fra | set autoswitch on | Set autoswitch on on | |
| get autoswitch | Hent auto-switching status | get autoswitch | Autoswitch on | |
| set output x downscale y | Indstil output (x=0~4) nedskaleringstilstand (y=0~1) x=0: alle outputs x=1~4: HDMI output 1~4 y=0: Automatisk efter displayets kapacitet y=1: Omgå video y=2: Tving 1080p | set output 0 downscale 0 | Set all outputs downscale auto 0 | |
| get output x downscale | Hent output (x=0~4) nedskaleringstilstand | get output 0 downscale | HDMI output 1 downscale auto HDMI output 2 downscale auto HDMI output 3 downscale auto HDMI output 4 downscale auto | |
| set output x display y | Indstil output (x=0~4) visningstilstand (y=0~3) x=0: alle outputs x=1~4: HDMI output 1~4 y=0: Fra (deaktiver TMDS output) y=1: Input video y=2: AVMUTE y=3: Intern testmønster Bemærk: Når y er 1, 2 eller 3, skal x være 0. | set output 0 display 2 | Set all outputs display internal pattern 1 | |
| get output x display | Hent output (x=0~4) visningstilstand | get output 0 display | HDMI output 1 display internal pattern HDMI output 2 display internal pattern HDMI output 3 display internal pattern HDMI output 4 display internal pattern | |
| set output x HDCP y | Indstil output (x=0~4) HDCP-tilstand (y=0~3) x=0: alle outputs x=1~4: HDMI output 1~4 y=0: Reserveret y=1: Følg sink y=2: Følg kilde y=3: Tving HDCP 1.4 y=4: Tving HDCP 2.2 | set output 0 HDCP 1 | Set all outputs HDCP follow sink 1 | |
| get output x HDCP | Hent output (x=0~4) HDCP-tilstand | get output 0 HDCP | HDMI output 1 HDCP follow sink HDMI output 2 HDCP follow sink HDMI output 3 HDCP follow sink HDMI output 4 HDCP follow sink | |
| set CEC on/off | Indstil CEC til til/fra | set CEC on set CEC off | Set CEC enable Set CEC disable Disable | |
| get CEC | Hent CEC til/fra-status | get CEC | CEC enable CEC disable | |
| set generator x y | Indstil intern signalgenerator opløsning (x=1~15) mønster (y=1~13) x=01: 8K30Hz x=02: 4K120Hz x=03: 4K100Hz x=04: 5K60Hz x=05: 5K50Hz x=06: 5K30Hz x=07: 5K25Hz x=08: 5K24Hz x=09: 4K60Hz x=10: 4K50Hz x=11: 4K25Hz x=12: 4K24Hz x=13: 1080P60Hz x=14: 480P60Hz x=15: 5760P50Hz y=01: Farvebjælke y=02: Skakternet y=03: Stribe y=04: Rød y=05: Grøn y=06: Blå y=07: Hvid y=08: Ramp y=09: Rød ramp y=10: Grøn ramp y=11: Blå ramp y=12: PRBS y=13: Sort | set generator 1 1 | Set generator 8K30Hz color bar | |
| get generator | Hent intern signalgenerator outputopløsning og mønster | get generator | Generator 8K30Hz color bar | |
| set analog mute x | Indstil analog lyd mute til/fra x=Til, Fra | set analog mute on | Set analog mute on off | |
| get analog mute | Hent analog lyd mute-status | get analog mute | off | |
| set analog gain x | Indstil analog lydstyrke (x=0dB ~ -79dB) | set analog gain -79dB | Set analog gain -79dB 0dB | |
| get analog gain | Hent analogt lydstyrke-værdi | get analog gain | Analog gain -79dB | |
| set edid x to y | Indstil inputporte (x=0~2) til EDID (y=0~41) x=0: alle input x=1~2: HDMI input 1~2 y=00: HDMI 1080p@60Hz, Audio 2CH PCM (standard) y=01: HDMI 1080p@60Hz, Audio 5.1CH DTS/DOLBY y=02: HDMI 1080p@60Hz, Audio 7.1CH DTS/DOLBY/HD y=03: HDMI 4K@60Hz 4:4:4, 8-bit, Audio 2CH PCM y=04: HDMI 4K@60Hz 4:4:4, 8-bit, Audio 5.1CH DTS/DOLBY y=05: HDMI 4K@60Hz 4:4:4, 8-bit, Audio 7.1CH DTS/DOLBY/HD y=06: HDMI 4K@120Hz 4:4:4, 8-bit, Audio 2CH PCM y=07: HDMI 4K@120Hz 4:4:4, 8-bit, Audio 5.1CH DTS/DOLBY y=08: HDMI 4K@120Hz 4:4:4, 8-bit, Audio 7.1CH DTS/DOLBY/HD y=09: HDMI 4K@120Hz 4:4:4, 10-bit HDR/DV, Audio 2CH PCM y=10: HDMI 4K@120Hz 4:4:4, 10-bit HDR/DV, Audio 5.1CH DTS/DOLBY y=11: HDMI 4K@120Hz 4:4:4, 10-bit HDR/DV, Audio 7.1CH DTS/DOLBY/HD y=32: EDID pass-through (Kopier fra Sink 1) y=33: EDID pass-through (Kopier fra Sink 2) y=34: EDID pass-through (Kopier fra Sink 3) y=35: EDID pass-through (Kopier fra Sink 4) y=36: Reserveret y=37: Reserveret y=38: Reserveret y=39: Reserveret y=40: Bruger EDID 1 y=41: Bruger EDID 2 | set edid 0 to 0 | Set all inputs EDID to SDF_00: HDMI 1080p@60Hz, Audio 2CH PCM (default) 0 | |
| get edid x | Hent inputporte EDID x=0: alle input x=1~2: HDMI input 1~2 | get edid 0 | HDMI input 1 EDID SDF_00: HDMI 1080p@60Hz, Audio 2CH PCM (default) HDMI input 2 EDID SDF_00: HDMI 1080p@60Hz, Audio 2CH PCM (default) | |
| get edid data x | Hent inputporte EDID-data x=0: alle input x=1~2: HDMI input 1~2 | get edid data 0 | HDMI input 1 EDID HDMI input 2 EDID | |
| set user edid x | Indstil brugerdefineret EDID (x=1~2) x=1: Brugerdefineret 1 x=2: Brugerdefineret 2 y = 00 FF FF FF ….. (y er 256 byte EDID-data) | set user edid 1 | User defined 1 EDID is loaded successfully | |
| get user edid x | Hent brugerdefineret EDID (x=1~2) x=1: Brugerdefineret 1 x=2: Brugerdefineret 2 | get user edid 1 | User defined 1 EDID |