Frequently asked questions

It supports resolution max up to 1920x1200.

Product Size in mm: 82x43x23mm, Product Weight in g: 360g.

The PM-MOTION1-37 is suitable for mounting 23"–42" (58–107cm) LED/LCD TVs weighing up to max. 30kg (66lbs).

The PM-MOTION1-37 is compatible with VESA 75x75, 100x100, 200x100, and 200x200.

PM-MOTION4-65S supports TV sizes 37''-77'' (94-178cm) and a rated weight of 45kg (99lbs).

PM-MOTION4-65S supports VESA patterns 200x200, 300x300, 400x200, 400x400, and 600x400.

Tilt adjustment range is -15° to +15°, and rotation adjustment range is -3° to +3°.

This product must be installed on a vertical wall; installation on ceilings or angled walls is strictly prohibited. Ensure the wall can support the combined weight of the mount and display. The TV must always be removed before making adjustments.

23-42" (58-107cm)

100x100 | 200x100 | 200x200

The wall must be capable of supporting a weight of at least five times the product’s weight.

The PM-STYLE-23A supports recommended screen sizes of 13"- 27" and a maximum weight of 15kg.

The maximum VESA pattern supported is 100 x 100.

It offers tilt adjustment of ±15°, swivel of 60°, and rotation of 360°.

Mounting screws must be anchored into the center of the studs, and the use of a stud finder is highly recommended.

The package includes an articulated arm assembly, two decorative covers, 3mm and 4mm Allen keys, M4x14 and M5x14 screws, D5 washers, ST5.5x50 screws, concrete anchors, and D6 washers.

This product is intended for indoor use only.

PM-STYLE-23B supports screen sizes from 13 to 27 inches and a maximum weight of 15 kg.

PM-STYLE-23B supports VESA mounting patterns up to 100 x 100 mm.

The wall must support at least five times the combined weight of the TV and mount, and the mount must be securely fixed to a stud or a single layer of brick more than 10 mm thick. It must not be installed on wood chipboard walls or cavity walls without studs.

Improper installation may cause injury or property damage and the manufacturer will not be liable for such damages. The warranty applies only to the product itself and does not cover improper installation or use. Altering or modifying the product voids warranty and guarantee.

The PM-STYLE-23C supports VESA 75x75 and 100x100 for displays with a diagonal of 33-68cm (13-27 inches).

The PM-STYLE-23C mount has a maximum load capacity of 15kg (33lbs).

The PM-STYLE-23C offers 180° left/right swivel, 360° rotation, and +15°/-15° tilt.

The PM-STYLE-23C supports VESA 75x75 and 100x100 mount patterns and requires a wall capable of supporting four times the weight of TV and mount combined.

Use with products heavier than rated weights may cause instability. Installation should be by qualified installers. Do not use for purposes not specified by PureMounts. Inspect bracket for defects before use.

The manufacturer grants the full statutory warranty on all new devices but is not liable for damage caused by improper installation or use. Warranty void if product is altered or used outside the manual instructions.

The PM-STYLE-37A is designed for screens 23-42" and supports a maximum weight of 15kg.

Compatible VESA mounting patterns are 100x100, 200x100 and 200x200.

It is intended to be installed on wood stud walls, solid concrete walls or concrete block walls only.

This product is intended for indoor use only and is not intended for use with CRT (Cathode Ray Tube) TVs.

It supports screen sizes from 23" to 42" with a maximum weight of 15kg.

The PM-STYLE-37B supports VESA mounting patterns 100x100, 200x100 and 200x200.

Tilt: ±15°, Swivel: 120°, Rotation: 360°.

PureLink GmbH declares compliance with Directive 1907/2006/EU and 2011/65/EU. Warranty applies only to the product itself, not installation. The manufacturer is not liable for damage caused by improper installation or use.

PM-STYLE-37C is recommended for screen sizes 23"- 42" and supports a maximum weight of 15kg.

The PM-STYLE-37C supports VESA mounting patterns 100x100, 200x100, and 200x200.

It offers a tilt of ±15°, swivel of 180°, and rotation of 360°.

The distance from the wall ranges between 97 and 423 millimeters.

The product must be installed onto solid wall structure and not drywall or plaster alone; use provided anchors for brick or concrete walls. The mount's load capacity must not be exceeded and all screws should be securely tightened without overtightening.

PM-SLIMFLEX-52 supports 32"-47" TVs.

The PM-SLIMFLEX-52 supports 200x200, 300x300, 400x200, and 400x400 mounting patterns.

PureLink GmbH, Von-Liebig-Str. 10, 48432 Rheine, Germany, Phone +49 5971 800299-0, Fax +49 5971 800299-99, info@purelink.de, www.purelink.de

PM-SLIMFLEX-65 supports 37''-70'' TVs and has a maximum rated weight of 35kg (77lbs).

The PM-SLIMFLEX-65 supports 200x200, 300x300, 400x200, 400x400, and 600x400 mounting hole patterns.

The product is designed for use on wooden stud walls, solid concrete walls or solid brick walls only. Do not install on drywall without a wood stud.

An electric drill with appropriate bits, appropriate screwdriver, stud finder (recommended for wood stud walls), spirit level, and tape measure are required.

Locators & screws are provided but ensure they are suitable for your wall type. If not, use appropriate fixings (not included).

The PM-SLIMFIX-65 supports a maximum screen size of 70" and a weight rated up to 40kg (88lbs).

This product is intended for indoor use only.

If mounting to wood studs, screws must be anchored into the center of the studs and a stud finder is highly recommended; installers must verify that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.

Check that the bracket is secure and safe to use at regular intervals, at least every three months.

The PT-C-HDSDI uses a 5V 2A DC power supply and has a maximum power consumption of 3 Watt.

Users should read all instructions carefully, do not service the unit except as explained in the manual, provide proper ventilation and avoid water, keep the device on a stable surface, use only specified power adapters and cables, unplug before cleaning, and follow all warnings on the unit.

The PT-C-SDIHD supports NTSC 525@59.94, PAL 625@50, 720p@50, 720p@59.94, 720p@60, 1080i@50, 1080i@59.94, 1080i@60, 1080p@23.97, 1080p@24, 1080p@25, 1080p@29.97, 1080p@30, 1080p@50, 1080p@59.94, 1080p@60.

Input is 1x BNC [SDI]. Output are 1x HDMI and 1x BNC [SDI].

The package includes 1x PT-C-SDIHD, 1x Power supply unit (+5VDC, 2A), and 1x User Manual.

The PT-C-SDIHD uses a 5V 2A DC power supply with inter-locked power supply and maximum power consumption of 3 Watt.

The PT-C-SDIHD operates at temperatures from 0 to 40°C (32 to 104°F).

The PT-C-SDIHD supports up to 8 channels audio including 7.1 channel or 5.1 channel audio.

The PT-SC-VGAHD has inputs for VGA, S/PDIF digital audio, and analog stereo audio. It has one HDMI output.

The PT-SC-VGAHD supports Stereo PCM audio at 48KHz only, with inputs for S/PDIF and analog stereo audio.

The PT-SC-VGAHD can be controlled via IR remote control, Mini-USB remote control, and on-device push buttons; it also features an OSD control interface.

The package includes 1x PT-SC-VGAHD unit, 1x Power supply unit (+5VDC, 2A), 1x IR Remote control, 1x Installation software CD, and 1x User Manual.

PT-E-HD10 HDMI™ over Single Cat.X Extender with 2-way IR boosts up your video/audio transmission distance up to 40m (130ft) in HDTV 1080p format.

The bi-directional IR path allows users to boost IR control distance up to 100m (330 ft) and make IR control possible through a single Cat.X cable including HDMI signals.

The receiving unit is equipped with an 8-level equalization rotary control to adjust the equalization strength to the received HDMI signals accordingly.

Both transmitting and receiving units require 5V 2A DC power supply and have a maximum power consumption of 1 Watt each.

The PT-SP-DV18 has 1x DVI / HDMI input and 8x DVI / HDMI outputs both supporting 7.1ch audio and video.

It supports video up to WUXGA [1920x1200@60Hz] & UXGA [1600x1200@60Hz] with single-link 225MHz [6.75Gbps] bandwidth.

It has ESD protection of ±19kV air-gap and ±12kV contact discharge on the human body model and ±2kV on the core chipset, and firmware updates are feasible via USB port.

Use with care, follow all instructions and warnings on the unit, do not attempt self-service except as explained, provide proper ventilation and do not use near water, keep the device on a stable surface and use only designed power adapters and cables.

The adjustment range includes +90° to -90° swivel, 360° rotation, and +15° to -15° tilt.

It is designed for installation on desks made of strong durable wood, plywood, or composite wood with a minimum thickness of 18mm. It must not be used on glass, marble, or any fragile surfaces.

Use with products heavier than rated weights may cause instability causing possible injury. Use all supplied fasteners and fittings and assemble strictly per instructions. Check the mounting surface regularly for wear or damage and re-tighten as necessary.

This product complies with Directive 1997/2006/EG and 2011/65/EU. The manufacturer grants a full statutory warranty on the new device but is not liable for damage caused by improper installation or use not described in the manual.

This product is intended for indoor use only. Using it outdoors could cause product failure and personal injury. The mounting surface must safely support the combined load of equipment and hardware. Use at least two people for installing or removing heavy displays. Do not exceed the maximum weight indicated.

Improper installation may cause damage or serious injury. Do not modify this product as unauthorized modifications may cause it to become unsafe. Check that all screws, bolts, and nuts are securely tightened regularly. The manufacturer is not liable for damage caused by improper installation, operation, or maintenance not described in the manual.

PM-OFFICE-DM-23B is compatible with monitors sized 13”–27” and weights ranging from 3–9kg per arm.

The PM-OFFICE-DM-23B supports VESA mounting hole patterns 75x75 and 100x100.

The manufacturer PureLink GmbH is located at Von-Liebig-Str. 10, 48432 Rheine, Germany.

This product is intended for indoor use only.

Use with products heavier than rated weights may cause instability and injury. Tighten screws firmly but not overly tight. Do not install on vibrating, moving, or impact-prone structures. Do not install near heat sources or direct sunlight.

The mount supports monitors sized 13" to 27" (33-69 cm) with a maximum weight of 8 kg.

This mount supports VESA mounting patterns of 75x75 and 100x100.

The mount allows tilt angle adjustment from +90° to -40°, 360° monitor rotation, and height adjustment up to 415 mm.

The mount should only be installed by professionals, securely installed before mounting the monitor, and all screws must be tightened firmly but not over-tightened. Mounting screws should hit the center of wood studs or use appropriate fasteners for other surfaces. Do not exceed the maximum weight capacity and load the mount only up to one time its own weight after installation.

The maximum load capacity is 88kg (194lbs).

The mount supports 32''-52'' (81-140cm) TVs.

Supports 200x200/300x300/400x200/400x400.

+15°/-15° tilt, +3°/-3° rotation, and 420mm extension.

Do not exceed the maximum load capacity; remove TV before maintenance; tighten screws firmly without over tightening; intended for indoor use only; ensure wall supports at least five times the installation weight; install only by qualified personnel.

It complies with Directive 1907/2006/EU and 2011/65/EU.

PM-FLEX-52 supports VESA patterns 200x200, 300x300, 400x200, and 400x400, and fits TV sizes between 33" and 52" (81-140cm).

The PM-FLEX-52 is safety rated to hold up to 25kg (44lbs).

The maximum load capacity is 4.5kg.

It includes 2 side clips that can hold notebooks with a width between 240mm and 420mm.

Silicone feet and fold-out stoppers at the front edge hold and protect your notebook securely.

PM-ADAPT-A is suitable for screen sizes from 23-42 inches (58-107 cm).

PM-ADAPT-A is compatible with flat screen TVs, monitors, plasma TVs, LED TVs, and LCD TVs.

Install PM-ADAPT-A by first attaching the adapter to the TV, then mount it to the wall bracket. Installation time is approximately 5 minutes by one person, including instructions.

Use with products heavier than the rated weight may cause instability. Ensure the mounting surface supports the weight. The product must be installed by qualified personnel. Check the bracket regularly at least every three months.

Engineered to support displays weighing up to 30 kg.

Check that the bracket is secure and safe to use at regular intervals (at least every three months).

The adapter converts signals from DisplayPort (plug) to HDMI-A (socket).

No, this adapter does not work bidirectionally, it cannot be used for HDMI sources to connect to DisplayPort-ready sinks.

The PI155 supports DP 1.1 / HDMI 1.4 for resolutions up to WUXGA / 1920x1200.

The PI155 has highly precise manufactured and custom-fit 24-carat gold-plated pins guaranteeing perfect transmission and lasting functionality. It is made with high-quality materials and tested 100% before shipping.

The PI155 operates at temperatures from 0 °C to 70 °C and relative humidity from 5 % to 95 % and has the same range for storage temperature and humidity.

This adapter does not work bidirectionally; it cannot be used for DVI sources to connect to DisplayPort-ready sinks.

The adapters support resolutions up to WUXGA (1920x1200) and are downward compatible with all former DP and DVI versions.

The DVI plug is equipped with the usual screw locks for security purposes.

The scope of delivery includes 1x PI160 DisplayPort plug to DVI-D socket adapter.

It supports resolutions up to 4K UltraHD at 60Hz with a maximum data rate of 21.6 Gbps.

It has high purity tinned OFC copper conductors, AWG28 gauge, and triple shielding consisting of aluminum foil and a mesh.

It supports Audio-Return-Channel (HEC), Dolby Digital Plus, Dolby TrueHD, DTS-HD Master Audio™, DVD Audio, and SA-CD.

The PI5100-030 features a DisplayPort male connector and an HDMI-A male connector.

It supports resolutions up to WUXGA / 1920x1200.

It uses the PureLink SLS™ (Secure-Lock-System™) for secure and reliable connections.

It is made with high purity, tinned OFC copper conductors, triple shielding consisting of 100% closed aluminum foil, thick netting and additional inner shielding, and has an AWG28 conductor gauge.

It is 100% tested for professional AV applications and undergoes over ten quality tests during manufacturing.

The PI5200-010 cable has a DisplayPort male connector and a DVI-D Single Link (18+1) male connector.

It supports resolutions up to WUXGA (1920x1200).

The DVI Single Link Cable supports resolutions up to WUXGA (1920x1200).

Yes, the cable features gold-plated precision contacts with a locking mechanism.

The cable is 100% tested for professional AV applications.

The cable is 0.50 meters long and black in color.

The cable is a certified 3.00m long DVI Single Link Extension Cable in black.

It supports resolutions up to WUXGA / 1920x1200.

It has DVI-D Single Link (18+1) male to DVI-D Single Link (24+5) female connectors.

The cable uses high purity, tinned OFC copper conductors and triple shielding (AWG28).

Each cable is 100% tested to meet rigorous standards of professional AV applications.

The cable is strain-relieved and CE compliant.

The cable supports video resolutions up to 2560x1600 (QXGA).

It has DVI-D Male (24+1pin) connectors with PVC connector material and 24 carat gold-plated contacts.

It provides triple shielding with 100% sealed aluminium foil (two layers) and a 100% sealed braid.

The maximum data rate is 7.44 Gbps and the maximum pixel clock bandwidth is 340 MHz.

The cable uses high purity tinned plated OFC copper inner conductors, is a round cable type, and uses a high flexible PVC outer material with a diameter of 12.0 mm.

It supports 16/24 bit RGB/YUV, Deep Color, x.v.Color™, and standards HDCP, CEC, FullHD (1080i/p), HD ready (720i/p), SDTV (480i/p).

It features DVI-D Dual Link (24+1) male to DVI-D Dual Link (24+5) female connectors.

Supports DVI Dual Link (24+1) for resolutions up to WQXGA / 2560x1600.

Made with high purity, tinned OFC copper conductors and triple shielding (AWG28).

Equipped with gold-plated precision contacts and a locking mechanism.

100% tested for professional AV applications.

A black cable with 1.00m length.

The PI070 is a DVI-D Single Link (18+1) male to DVI-D Single Link (24+1) female portsaver with a 10cm cable.

The PI070 Portsaver supports resolutions up to WUXGA (1920x1200) and is downward compatible with all former DVI versions.

The Portsaver is connected to the socket of the receiving device and relieves it by picking up the traction coming from the connected cable. It has an extreme bending radius (up to 180°) thanks to its highly elastic manufacturing.

All PureInstall adapters are manufactured in the most modern facilities and are tested 100% before shipping. During the manufacturing process, the adapters undergo over ten quality tests.

The scope of delivery includes 1x PI070 DVI-D plug to DVI-D socket portsaver.

The PI1000-005 is an HDMI 2.0b high-speed cable with a certified High Speed HDMI topology supporting bandwidth up to 18Gbps for resolutions up to 4K UltraHD at 60Hz. It includes HDMI-A male connectors with the PureLink Secure-Lock-System and uses high purity, tinned OFC copper conductors with triple-layer shielding.

The PI1000-005 uses high purity, tinned oxygen-free copper (OFC) conductors with triple shielding composed of aluminium foil + Mylar layer, aluminium foil, and aluminium braid to reduce signal degradation and electromagnetic interference.

The PI1000-005 features 24 kt gold-plated precision contacts with PureLink Secure-Lock-System (SLS), a mechanical retention mechanism designed to prevent accidental disconnections in fixed setups.

It supports resolutions up to WUXGA (1920x1200).

It uses high purity, tinned OFC copper conductors and triple shielding made of 100% closed aluminum foil, thick netting and an additional inner shielding.

The cable features gold-plated precision contacts with PureLink SLS™ (Secure-Lock-System™) that enhances the stability of the connection even with high traction rates.

Yes, the cable has undergone over ten quality tests during manufacturing and is 100% tested before shipping for professional AV applications.

The cable supports the full HDMI 2.0 specification and data rates up to 18 Gbit/s, enabling reliable transmission of 4K UltraHD video at 60Hz.

It features a Mini HDMI-C male to HDMI-A male connector arrangement.

It utilises high-purity, tinned OFC copper conductors in AWG32 gauge combined with triple-layer shielding and a Polyvinyl Chloride (PVC) cable jacket.

Yes, each cable undergoes complete functional and compliance testing to guarantee performance in professional AV scenarios and is 100% tested for professional AV applications.

It supports data rates up to 18Gbps, enabling transmission of 4K UltraHD video at 60Hz with full compatibility for 3D, Deep Color, and x.v.Color™.

It utilises high-purity, tinned oxygen-free copper (OFC) conductors with triple-layer shielding to minimise electromagnetic interference and is specified at AWG32.

Gold-plated contacts with PureLink Secure-Lock-System (SLS) enhance electrical contact reliability and mechanical retention, reducing the risk of signal loss due to accidental unplugging in professional installations.

Each cable undergoes comprehensive testing to verify performance and reliability under professional AV conditions, ensuring suitability for demanding applications.

The cable jacket material is Polyvinyl Chloride (PVC).

The PI100 supports HDMI 2.0 with 18Gbps bandwidth. It enables transmission of 4K UltraHD content at 60Hz with full compatibility for HDR, 3D video, and advanced colour spaces.

The PI100 offers HDMI-A female connectors on both front and rear, supporting direct extension of standard HDMI cables.

It features 24-karat gold plating on precision connectors to reduce contact resistance and oxidation. The integrated Portsaver cable minimises mechanical stress on source and display ports.

All PureInstall wall plates are manufactured in modern production facilities and are tested 100% before shipping. The cables undergo over ten quality tests during manufacturing.

The PI105 supports HDMI version 2.0 with a bandwidth of 18 Gbps for resolutions up to 4K UltraHD 60Hz.

Yes, the PI105 features gold-plated contacts with 2x Portsaver cable.

Yes, the PI105 is specially adapted for professional installations.

The PM-MOVE-52A supports VESA patterns 100x100, 200x100, 200x200, 400x200, 300x300, and 400x400.

Use a stud finder to ensure mounting screws are anchored into the center of the studs.

Check that the bracket is secure and safe to use at regular intervals, at least every three months.

The PM-MOVE-52A allows height adjustment up to 335mm, tilt adjustments +15° and +3° / -3°, and horizontal swivel of 180°.

PM-MOVE-52B 55"

You should check the tightness of the screws every two months.

The tilt range is up to 105°.

It is designed for indoor use only and for mounting on wood studs and solid concrete only, not drywall alone.

The mount is suitable for TVs sized 23"-42" (58-107cm) and can support up to 25kg (44lbs).

VESA-compatible mounting patterns are 75x75, 100x100, 200x100, and 200x200.

The ceiling structure must support four times the total weight of the installation. Installation must be by qualified personnel using suitable tools. Improper installation may cause damage or injury. Use suitable spacers and longer screws for curved rear panels. For indoor use only.

Check all screws and bolts at regular intervals to ensure none are loose. Do not use the product if any parts are damaged or faulty.

The PT-SP-HD14-4K has 1x HDMI input and 4x HDMI outputs. Each HDMI connector is Type A with 19 pins and supports 7.1 channel audio and video.

It supports Dolby Digital, DTS-HD Master Audio, Dolby TrueHD, DTS, DVD-Audio, LPCM, SACD, and MPCM audio formats.

It has 1x HDMI input and 8x HDMI outputs with 7.1 channel audio and video. HDMI connector type is Type A [19-pin female].

The device supports resolution up to 4K2K at 30 Hz with video bandwidth single-link 340MHz [10.2Gbps].

The unit requires 5V 4A DC power supply with a maximum power consumption of 10 Watts. Its dimensions are 243 x 98 x 25 mm (9.5" x 3.9" x 1") and it weighs 880 g (31 oz).

Model: PM-CEILING-23 – manual version 1.0

Illustration showing 180° swivel and ±20° tilt adjustment range for mounted TV

The maximum load capacity is 30kg (66lbs).

The PM-CEILING-37 mount is compatible with VESA 75x75, 100x100, 200x100, and 200x200.

It supports TVs from 23 to 47 inches (58 to 119 cm).

The PM-EASYFLEX-37 is suitable for TVs from 23 to 42 inches with a maximum load capacity of 35 kg.

It is compatible with VESA 75x75, 100x100, 200x100, and 200x200 mounting patterns.

The PM-EASYFLEX-37 is for indoor use only and must not be used outdoors.

The PM-EASYFLEX-65 supports up to 70" with a maximum weight of 30 kg (66 lbs).

The mount must be installed only as specified in the manual by someone with good mechanical ability. Screws must be anchored in the center of studs if mounting to wood walls. Use an assistant to lift equipment safely. Do not over tighten screws and use only indoors.

The PM-LM-TS32 mount has a rated weight capacity of 30kg (66lbs).

The PM-LM-TS32 supports screen sizes from 10 to 42 inches (25 to 107 cm).

It supports VESA mounting patterns 50x50, 75x75, 100x100, 200x100, and 200x200 mm.

The wall must be capable of supporting the combined weight of the mount and the display or must be reinforced; for wooden studs, a minimum thickness of 0.75" (19mm) is required.

Tighten screws firmly but do not over tighten; over tightening can cause damage to items and reduce holding power. Also, use two people for mounting the assembly to the wall bracket, and keep small parts away from children due to choking hazard.

The model number is PM-LM-TS32E.

It is suitable for displays from 10.4" to 25.6" and supports a maximum load of 30kg (66lbs).

It supports 75x75, 100x100, 200x100 and 200x200 mounting patterns.

This product is intended for indoor use only.

The manufacturer grants the full statutory warranty on all new devices. The manufacturer is not liable for damage caused by improper installation, operation or maintenance not described in this manual.

The bracket can swivel up to 90° in both directions and can also be tilted up and down by 20°.

The distance from the wall is variable from 100 to 490 mm.

It is the installer’s responsibility to ensure the structure can support five times the weight of the monitor and mount combined. Product can weigh in excess of 8Kg (17.6 lbs). Always use two people to lift, move and install the product. Tighten screws only as instructed. Improper installation or use may cause serious injury or death.

Included are HDMI Cable x 1, User´s Manual, Mini-USB, Power Adapter x2, USB Cable (for Transmitter), Anchors x2, Screws x2.

PureLink GmbH is located at Von-Liebig-Str. 10, 48432 Rheine, Germany.

It requires a switch mode power adapter with 100-240VAC @ 50-60Hz input and 5VDC 3A output.

It must not be disposed of with unsorted municipal waste and should be disposed of separately via designated collection facilities. Remove batteries and lamps that can be removed before handing in and delete any personal data stored on the device.

The adapter supports resolutions up to 2K / 1920x1080.

The cable length is approximately 0.15 meters (Portsaver).

No, the IS030 adapter is non-bidirectional.

The cable features PureLink's patented Ultra Lock System (ULS) technology, which locks the HDMI connector securely into the socket. The safety lock can be used universally with any HDMI socket and can be easily switched between the locked and unlocked positions by using a 360° locking switch.

It supports 4K x 2K video resolutions far beyond 1080p, 3D over HDMI, HDMI Ethernet Channel, Audio Return Channel, additional color spaces, and improved sound spectrum with up to 32 audio channels at max. 1536 kHz sample frequency.

More than 10 different quality tests are carried out during production, and each cable is 100% tested before leaving the factory to guarantee 100% performance.

The SE-SP000-010 speaker cable uses 99.9% Oxygen-Free Copper (OFC) as conductor material and its insulation is made of soft, transparent PVC.

The cable has a cross section of 2 x 1.50 mm² and an ultra-fine strand structure with strands of 0.10 mm diameter.

The SE-SP000-010 speaker cable is 10 meters long and has transparent sheathing with a blue polarity marking.

The FX-D120 transmitter and receiver use TMDS Signal (DVI 1.0 standard).

The maximum supported resolution is PC : WUXGA(1920x1200)60Hz and HD : 1080P(12bit Deep Color).

The transmitter uses a 24 PIN DVI-D Plug(input) and 1 LC Connector for optical, and the receiver uses a 24 PIN DVI-D Plug(output) and 1 LC Connector for optical.

50 / 125um Multi-mode glass-fiber is recommended.

The transmitter module supply voltage is typically 5.0V with typical supply current 510 mA, and the receiver module supply voltage is typically 5.0V with typical supply current 400 mA.

Operating temperature is 0 to +50°C and storage temperature is -20 to +70°C.

It transmits the EDID information and HDCP over fiber in real time.

Package includes FX-P120 Transmitter & Receiver, +5V DC Power supply x 1pcs, User Guide.

Connect the Transmitter to the DVI source device; connect the Receiver to the display; connect a single strand multi-mode SC terminated optic fiber from Transmitter to Receiver; connect the included +5V DC power supply into Receiver module.

One year limited warranty for defects from manufacture within one year of purchase date, free repair or replacement if unit is not mistreated.

It supports display resolutions up to 2560x1600 (WQXGA).

A blue indicator LED will light up after all connections are completed. The manual also provides troubleshooting conditions depending on LED indicator status.

One year limited warranty. Customers are liable to a free of charge repair or replacemenent, if goods are found to be defective with in 1(one) year of the purchase date, providing the unit has not been mistreated.

It supports resolutions up to FullHD (1920x1080) and WUXGA (1920x1200).

The package includes FX-P320 Transmitter & Receiver, +5V DC Power supply x 2pcs, and User Guide.

One year limited warranty with free of charge repair or replacement if goods are found defective within one year of purchase and the unit was not mistreated.

The CSW100 supports FullHD resolutions up to 1080p and all 3D formats. Examples of HD devices: Blu-ray players, HD set-top boxes, PlayStation4, XboxOne, etc.

1x PureLink CSW100 Transmitter (TX), 1x PureLink CSW100 Receiver (RX), 1x IR Receiver, 1x IR Emitter, 2x Power adapter 5V1A (Micro USB), 1x Manual, 1x Screw Set, 1x Wall Mount.

In a direct line-of-sight, the maximum range of A/V signal transmission can reach up to about 30 meters. The optimum indoor range is under 30m.

Supported HDTV resolutions are 1080p, 720p, 576p, 480p and supported 3D formats include Frame Packing 1080p@24Hz,720p@50/60Hz.

Connect HDMI IN of the transmitter to source device, HDMI OUT of transmitter to a display (loop-through). Connect HDMI OUT of receiver to display. Optionally connect IR emitter and IR receiver. Connect 5V1A power adapters to transmitter and receiver. Press MODE button on receiver then transmitter to pair.

The sensor provides a 180-degree detection angle with a maximum range of 12 metres. The detection range is max. 12m (<24°C) and the detection angle is 180°.

Input voltage is 220-240 V AC / 50 Hz. Maximum power is 1200 W or 300 W. Minimum load is 1 W.

Operating temperature is -20° to +40°C. Relative humidity <93% RH. Installation height is 1.8 to 2.5 m. It is suitable for indoor and outdoor use with IP44 protection class.

Light quantity (3-2000 LUX) and switch-on time (10 seconds - 7 minutes) are infinitely adjustable. Time adjustment controls how long the lamp stays on after activation; LUX setting adjusts ambient brightness sensitivity.

The X-IMS020 features a 360° detection angle, detection range up to 6 meters at less than 24°C, input voltage of 220–240V AC, and an IP20 protection class. Its ambient brightness range is 3 to 2000 Lux, operating time is adjustable between 10 seconds and 7 minutes, and installation height is 2.2 to 4 meters.

The X-IMS020 is an infrared motion sensor that reacts to heat radiation (infrared radiation) from moving objects entering its detection area. Thermal radiation propagates in a straight line and is blocked by glass or solid objects.

The sensor supports motion detection up to 12 metres and provides a 180° detection angle.

The recommended installation height is between 1.8 and 2.5 meters.

The input voltage is 220-240 V AC at 50 Hz.

The sensor has a detection range of up to 9 metres and a detection angle of 160°.

The input voltage is 220-240 V AC / 50 Hz. The maximum power is 500 W or 200 W, with a minimum load of 5 W.

This product is classified as IP20 for indoor mounting.

Operating temperature is -20° to +40°C, and installation height should be 1 to 1.8 meters.

It reacts to heat radiation (infrared radiation) of moving objects that enter the detection area of the sensor. Entering the detection area switches the connected electrical consumer on and after an adjustable time off again automatically.

Only skilled electricians may assemble and disassemble the housing. Avoid contacting mains voltages and turn off power before working. Do not bridge contacts or put things into ventilation slots or ports. A defective device must be removed from use immediately.

The output voltage is +5V with a maximum load of 2A.

The input voltage range is 100–240VAC and the frequency is 47–63Hz.

The efficiency is greater than 78.7% at average load with ripple & noise under 1% (Peak to Peak Maximum).

The suggested continuous load is under 1.6A (80%).

MAX 80kg (176lbs) RATED, 70" display size.

MAX 80kg (176lbs) RATED

This product is intended for indoor use only.

Manufacturer is PureLink GmbH, Von-Liebig-Str. 10, 48432 Rheine, Germany.

MAX 60kgx2 (132lbsx2) RATED

200x200/300x300 400x200/400x400 600x400

This product is intended for indoor use only.

PDS-1002S 60" MAX 60kgx2 (132lbsx2) RATED

Component Checklist column (x1) (B), cable clip (x6) (C), fixing piece (x1) (D), top cover (x1) (E), universal plate (x2) (G), adapter bracket (x4) (H), base (x1) (A), big universal plate (x1) (F), plus various washers, screws, spacers, Allen keys, and rubber pads.

Use the cable clips for routing cables.

The components include washer M-F (x4), M8x20 M-C (x4), M5x14 M-A (x4), M6x14 M-B (x4), big spacer (x4) M-H, M6x30 M-D (x4), M8x30 M-E (x4), small spacer (x8) M-G, cable clip (x5), base (x1) A, column (x1) B, tilt plate C (x1), universal plate (x1) E, adapter bracket (x2) F, 5mm Allen key (x1) P-C, M8x15 (x7) P-A, M8x40 (x3) P-B, 6mm Allen key (x1) P-D, rubber pad (x4), D8 metal washer (x3) P-E, D8 plastic washer (x4) P-F, D8 metal washer (x4) P-G.

Do not exceed rated listed weight. Always use an assistant or mechanical lifting equipment to safely lift and position the equipment. Tighten screws firmly but do not over tighten. This product is intended for indoor use only.

The manufacturer is PureLink GmbH located at Von-Liebig-Str. 10, 48432 Rheine, Germany. Contact by phone +49 5971 800299-0 or email info@purelink.de.

The PDS-1101C supports 200x200, 300x300, 400x200, 400x400 and 600x400 VESA mounting patterns.

Yes, the tilt handle can be loosened to adjust the display angle and then tightened to hold it in place. It can be tilted +3° or -3°.

This product is intended for indoor use only.

Check that the bracket is secure and safe to use at regular intervals, at least every three months.

The maximum load for model PDS-2021C 70" is 10 kg (22 lbs).

The compatible VESA mounting patterns are 300x300, 400x200, 400x400, and 600x400.

Yes, the display can be rotated clockwise and secured with a screw, allowing for landscape or portrait view.

The PDS-2001C has a maximum rated weight of 10kg (22lbs).

The PDS-2001C supports the VESA mounting patterns 200x200, 300x300, 400x200, 400x400, and 600x400.

The tools provided are 3mm Allen key, 5mm Allen key, 6mm Allen key and a wrench.

This product is intended for indoor use only.

Check that the bracket is secure and safe to use at regular intervals, at least every three months.

The maximum size supported is 100".

Supported VESA patterns are 200x200, 300x300, 400x200, 400x400, 600x400, 800x400, 800x600, and 1000x600.

The rated weight is 10kg (22lbs).

This product is intended for indoor use only.

The PDS-2032C is rated for 10kg (22lbs).

The PDS-2032C supports flat panel displays up to 70".

Do not exceed the rated listed weight to avoid serious injury or property damage. Use an assistant or mechanical lifting equipment to safely lift and position the equipment. Tighten screws firmly but do not over tighten.

The PDS-2101C supports 200x200, 300x300, 400x200, 400x400 and 600x400 mounting patterns.

Installation must be done only as specified in the manual. Use an assistant or mechanical lifting equipment to safely lift the equipment. Tighten screws firmly but do not over tighten. Product is intended for indoor use only.

MAX 60kgx2 (132lbsx2) RATED

MAX 200x200/300x300 400x200/400x400 600x400

The PDS-2303C 55" MAX 50kgx3 (110lbsx3) RATED.

Supported VESA mount patterns are 200x200, 300x300, 400x200, 400x400, and 600x400.

Components include middle base, left and right covers, adapter brackets, left and right bases, universal plates, connecting fittings, multiple screws and washers, supporting foot (x4), caster wheels/brakes, wrench, and other assembly tools.

The product name itself specifies it is for displays up to 55".

Do not exceed rated listed weight. Serious injury or property damage may occur! Make sure supporting surface will safely support combined weight of equipment and hardware. Do not over tighten screws. Use an assistant or mechanical lifting equipment to safely lift and position the equipment.

The item number is PDS-5700.

The package includes a case, 1B key, M5 screws, washers, concrete anchors, screws ST4.8x30, M5x12 screws, 1button, and various silicone pads (A, B, C, D, E, F) in specified quantities.

Manufacturer is PureLink GmbH, Von-Liebig-Str. 10, 48432 Rheine, Germany, phone +49 5971 800299-0, fax +49 5971 800299-99, info@purelink.de, website www.purelink.de.

The package includes washer 4, concrete anchor 4, M5 4, ST4.8x30 4, case, silicone pads (A-F) 2 each, and key 1.

The manufacturer is PureLink GmbH, Von-Liebig-Str. 10, 48432 Rheine, Germany, Phone +49 5971 800299-0, Fax +49 5971 800299-99, info@purelink.de, www.purelink.de.

The PDS-5610 includes the following components: pole, anti-theft box, base, plastic pad, M6x16 screws, ST5.5x38 screws, concrete anchors, Allen key, M5x8 screws, anti-theft screws, and an anti-theft tool.

The model number is PDS-5610 and it belongs to the product group PureMounts DS.

The PDS-5610 supports rotation angles of +90° / -90°.

Model: PDS-5630 with manual version 1.0.

The manufacturer is PureLink GmbH, Von-Liebig-Str. 10, 48432 Rheine, Germany.

The manufacturer grants the full statutory warranty on all new devices. The warranty only applies to the product itself. If you detect a fault or damage, please contact your dealer and provide your sales slip or invoice as proof of purchase.

The manufacturer is PureLink GmbH, located at Von-Liebig-Str. 10, 48432 Rheine, Germany.

The manufacturer grants the full statutory warranty on all new devices. The warranty only applies to the product itself.

Any use other than described in this manual is not permitted and voids warranty and guarantee. The manufacturer is not liable for damage caused by improper installation, operation or maintenance not described in this manual.

The PT-MA-HD44-QV has 4 HDMI Type A Female (Lockable) inputs and 4 HDMI Type A Female (Lockable) outputs.

The PT-MA-HD44-QV can be controlled by front panel Push Buttons, OSD (keyboard / mouse), IR Remote Control or RS232 interface.

RS-232 Commands have bits per second: 115200, Date bits: 8, Parity: None, Stop bits: 1, Flow control: None, and 33 documented commands.

Operating temperature is 0° ~ 40°C, and storage temperature is -20°C ~ 60°C.

The PT-MA-HD44-QV requires a power adapter rated DC 12V.

The cable features an HDMI-A male to DVI-D Single Link (24+1) male termination.

The cable is triple shielded with copper braid (90% coverage) and uses stranded copper conductors with AWG 30 gauge.

The cable length is 0.5 meters and it operates from -20 °C to 60 °C.

The HDMI Portsaver Adapter ULS010 (plug / socket) of the Ultimate Series provides a 15cm long, extremely flexible cable (HDMI-A male to HDMI-A female connector).

Ethernet channel (HEAC) and audio return channel (ARC) are included in the ULS010. With the Ethernet channel (HEAC), IP-based entertainment devices can be integrated into the home network without additional cabling. The audio return channel sends the digital audio signal back to the AV receiver via the HDMI cable, eliminating the need for a separate Toslink cable.

The ULS010 uses high-purity OFC copper conductors with triple shielding and 24 carat gold plated contacts. The triple shielding protects the inner conductor and makes the cables immune to interference and crosstalk.

All cables are produced in highest technology manufacturing facilities and 100% tested before shipping. They undergo more than ten different quality tests during production and quality control in PureLink's in-house test laboratory guaranteeing 100% performance.

Use the product only in dry interior rooms. This product is made for home use like described in chapter 2.

This product is classified as IP20.

Detection range is max. 6 m (<24°C) and detection angle is 360°.

Only skilled electricians may assemble and disassemble the housing. Turn off the power of all circuits before working on the product. Do not bridge contacts or put objects into ventilation slots or ports. A defective device may not be put into operation.

The scope of delivery includes 1x Infrared motion sensor and 1x User‘s manual.

The CSW300 set includes 1x PureLink CSW300 Transmitter (TX), 1x PureLink CSW300 Receiver (RX), 4x Antenna, 1x IR Receiver, 1x IR Emitter, 2x Power adapter 5V1A (Micro USB), and 1x Manual.

In a direct line-of-sight, the maximum range of A/V signal transmission can reach up to about 100 meters. The optimum indoor range is under 100m.

It supports up to HDR 4K2K@60 (4:2:0 10bits) and 4K2K@60 (4:4:4 8bits).

The device measures 49 x 56 x 17mm and weighs 95g.

It is powered by 5V 0.85A DC (optional) and consumes a maximum of 3 Watts.

It offers ESD protection with human body model ±15kV air-gap discharge and ±8kV contact discharge.

It supports up to 4K@60Hz 4:4:4 resolution. "Up to 4K@60Hz 4:4:4" and "Supports resolutions up to 4K (2160p, 4:4:4, 60Hz)".

For 4K 60Hz 4:4:4 signal, the total transmission distance is up to 10m, with a maximum of 5m from DP output to display. For 4K 30Hz 4:4:4 and 1080p, the total transmission distance is up to 30m, with up to 15m from DP output to display.

It requires an external 5V DC power supply, input AC 100~240V, 50/60Hz, output 5V DC 1A with max power consumption 2W.

Do not dismantle or modify the module; avoid exposure to rain or moisture; keep the device away from liquids and ensure sufficient ventilation; unplug immediately if liquids spill on it; do not twist or pull on optical cables; use only specified supplies and parts.

The PT-TOOL-500 has 1 HDMI input, 1 USB port, and 1 RJ-45 Ethernet input. For output, it has 1 HDMI output and 1 3.5mm stereo analog audio output.

The major functions include HDMI Generator, HDMI Receiver, HDCP Test, EDID Test, and Loop Test.

Yes, the PT-TOOL-500 supports firmware updates through USB flash drive and also supports user defined patterns up to 2GB.

Follow all instructions and warnings marked on the unit, do not service it yourself except as explained in the manual, provide proper ventilation without water exposure, keep it on a stable surface, use only designed power adapter and cables, unplug before cleaning, and do not use liquid or aerosol cleaners.

It supports pure unaltered uncompressed 7.1 channel digital HDMI audio, DTS-HD Master Audio, and Dolby TrueHD high bit rate audio.

The package contains the PT-E-HD60 transmitter and receiver units, one IR blaster, one IR receiver, a 24V 1A power supply, and a user manual.

Do not attempt to service the unit yourself except as explained in the manual. Provide proper ventilation and air circulation, avoid use near water, place on a stable surface, and use only the power adapter and cables designed for it.

The device supports Dolby Digital 5.1 and stereo audio simultaneously with adjustable volume and delay.

The JP-UL-718AVP features 3.5mm Line-In, 3.5mm Mic-In, Gigabit Ethernet, HDMI In, 3.5mm Stereo Out, 3.5mm RS232 with null modem, and Micro-USB 2.0 ports.

The device supports AES-128 encryption and HDCP 2.2 content protection.

The JP-UL-518AVP supports video up to 4096x2160 (interlaced & progressive).

JP-UL-518AVP supports all audio formats with adjustable volume and delay and features a 3.5mm stereo audio output.

JP-RS1U holds up to 13 Just Add Power standalone units.

It takes between 3-5 RU of rack space with units installed.

The weight is 0.91 kg or 2.0 lb.

Compatible with JustAddPower 2G Omega and 3G Ultra Transmitters and Receivers.

The compatible VESA mounting patterns are 200x200, 300x300, 400x200, 400x400, and 600x400.

It supports single display TVs from 37 to 70 inches (94-178 cm).

It must be installed according to the provided instructions. The maximum load capacity must not be exceeded. Regularly inspect all parts to ensure correct and safe operation. Use only on a flat and stable surface. Lock castors after moving. Do not move the cart when equipment is installed.

The maximum weight capacity of the PDS-0011C is 80kg (176lbs) for the TV, 5kg (11lbs) for the DVD, and 5kg (11lbs) for the camera.

The PDS-0011C is compatible with VESA mounting patterns 200x200, 300x300, 400x200, 400x400, 600x400, 800x400, 800x600, and 1000x600.

The TV panel center height can be adjusted to 1200mm, 1250mm, 1300mm, 1350mm, 1400mm, 1450mm, 1500mm, 1550mm, 1600mm, and 1650mm from the floor.

The PM-BASIC2-37W wall mount has a load capacity of 30 kg.

It supports VESA 75x75, 100x100, 200x100, and 200x200 mounting patterns.

The mount fits displays ranging from 23" (58 cm) to 42" (107 cm) diagonally.

The PM-LM-TS32W supports VESA 50x50, 75x75, 100x100, 200x100, 200x200 mounting patterns.

It supports displays with a diagonal from 58cm (23") to 107cm (42").

The extension features a standard HDMI-A male to HDMI-A female topology.

Gold-plated precision contacts incorporate the PureLink SLS mechanical locking system to minimise the risk of accidental disconnection.

It supports HDMI versions 1.3 to 2.0b, HDCP version 2.0, Consumer Electronics Control (CEC), Audio Return Channel (ARC), HDMI Ethernet channel and extended display identification data (EDID).

The cable has a round shape with a 7.3 mm diameter and matte polyvinyl chloride (PVC) jacket. It operates at temperatures from 0 °C to 25 °C and relative humidity from 5 % to 95 %.

PT-SP-HD14-HDR supports all 3D formats and the true 4K2K video. It supports 4K2K@60 4:4:4 8bits and HDR 4K2K@60 4:2:0 10bits, Dolby Digital, DTS-HD and Dolby TrueHD audio.

The device has 1 HDMI input and 4 HDMI outputs, all with Type A 19-pin female connectors.

It supports default EDID and EDID learning from displays. Automatic EDID learning detects all connected HDMI monitors and analyzes the EDID with minimal resolution support as reference for the HDMI source.

The PT-SP-HD18-HDR has 1 HDMI input and 8 HDMI outputs.

PT-SP-HD18-HDR is HDCP 2.2 and 1.4 compliant.

The PT-SP-HD18-HDR supports DTS-HD Master Audio, Dolby TrueHD Dolby Digital, DTS, DVD-Audio, LPCM, SACD, and MPCM audio formats.

Firmware update is feasible via Mini-USB port. For firmware update users must turn the power off, set the rotary switch to “0”, connect Mini-USB cable, open update software, set correct com port and baud rate (57600 recommended), select firmware file, power on device and press 'Program MCU'.

The PM-LM-TS32EW can be swiveled in both directions by up to 90° and tilted up and down by 20°.

The distance to the wall on this model is variable between 89-466mm.

This product is designed for use in wood stud and solid concrete wall and should not be installed into drywall alone.

The PM-LM-TS32B has a rated weight capacity of 30kg (66lbs).

The PM-LM-TS32B is compatible with screen sizes from 10-42 inches (25-107 cm).

The supported VESA patterns are 50x50, 75x75, 75x100, 100x100, 200x100, and 200x200.

The PT-PSW-42 transmitter supports video input via 2 HDMI, 1 DisplayPort, and 1 VGA, with video output via HDMI and HDBaseT. The receiver supports video input via HDBaseT and HDMI, with video output via HDMI.

The PT-PSW-42 supports output resolutions of 3840x2160@30Hz, 1920x1080, 1360x768, 1280x720, and 1024x768 and complies with HDMI 1.4a and HDCP 2.2 standards.

The PT-PSW-42 transmits video, audio, control commands, USB, and Ethernet signals over a single CATx cable up to 100 meters using HDBaseT technology.

The PT-PSW-42 includes relay ports that can be used to control devices such as projector screens or lighting by raising or lowering the projector screen with dedicated buttons on the front panel.

The PM-ADAPT-DW supports up to 30kg.

The product is intended for indoor use only. Maximum supported TV size is 23-55'' (59-140cm) and maximum weight is 30kg (66lbs).

The patented Ultra Lock System™ ensures uninterrupted, durable HDMI connections with a unique 360° interlock switch. The ULS™ technology was developed specifically for uninterrupted and secure HDMI use; it locks the connector securely into the socket and is unique on the market.

Yes, the HDMI Ethernet Channel adds high-speed networking to the HDMI link, and the Audio Return Channel allows an HDMI-connected TV with a built-in tuner to send audio upstream to a surround audio system, eliminating the need for separate cables.

The PM-CART-70B supports screens from 37" to 70" and VESA up to 600x400. The VESA hole dimensions supported are 200x200, 300x300, 400x200, 400x400, and 600x400.

The PM-CART-70B has a maximum load capacity of 50kg for the TV. The camera tray and AV shelf each have a load capacity of 5kg.

The cable has HDMI-A male to HDMI-A male connectors with 24kt gold-plated precision contacts featuring the Secure-Lock-System (SLS), a mechanical locking mechanism that minimises connection loss and prevents accidental unplugging.

Yes, the cable includes Ethernet capability and supports the Audio Return Channel (ARC).

The cable length is 1 meter, cable diameter is 6 mm, minimum bending radius for flexible use is 50 mm and for fixed installation is 20.3 mm.

The PM-BT200 supports TVs with screen diagonals from 58cm (23") up to 107cm (42") and a maximum load capacity of 35kg.

The PM-BT200 supports VESA standards 75x75, 100x100, 200x100, and 200x200.

The tilt adjustment range of the PM-BT200 is from 0° up to -14°.

The PM-BT200 provides a wall distance of 25mm when installed.

The PM-BT200 must be installed and inspected by qualified personnel only, the mounting surface must support the combined weight of TV and hardware, and installation near a heat source is prohibited.

It supports VESA 200x200, 300x300, 400x200, and 400x400 mounting patterns.

The mount is suitable for displays with a diagonal size ranging from 26" (66cm) up to 52" (132cm).

It offers tilt adjustment from 0° up to -14°.

The mount keeps the TV at a wall distance of 25mm or 35mm according to different sources.

The PM-BT600 supports VESA 200x200, 300x300, 400x200, 400x400, 600x400 and screen sizes from 32" to 65" (81cm to 165cm).

The load capacity of the PM-BT600 is 35kg (77lbs) rated.

The PM-BT600 allows adjusting the tilt angle from 0° to -14°.

The product must be securely fastened to the wall and only mounted onto solid wall types. Use correct wall type fixings only and do not overtighten screws. The product should only be installed by professionals.

The PM-T400 supports TVs from 26" (66cm) up to 52" (132cm) with a maximum weight of 75kg.

The PM-T400 mount allows tilt adjustment from 5° up to -10° for viewing angle adjustment.

The PM-T400 should be mounted to wood studs or solid concrete walls only.

For TVs with flat backs, use M5x14 (A) or M6x14 (B) screws with part D.

The PM-T600 offers a tilt range from 5° up to -10°.

The wall distance of the PM-T600 is 56mm.

The PM-T600 delivery includes 1x PM-T600 Wall Mount, 1x Set of Screws, and 1x Installation Manual.

The supporting wall/ceiling must be constructed of solid wood, brick, concrete or solid concrete block and must be capable of supporting at least four times the maximum load.

Tilt range is from 3° up to -12°, and swivel range is from 90° up to -90°, depending on wall distance and screen width.

The wall distance can be adjusted from 65mm up to 200mm.

The delivery includes 1x PM-FM11-100 Wall Mount, 1x set of screws, and 1x installation manual.

Installation should be by someone with good practical/technical knowledge. Use only mounting hardware included for common solid walls. Do not use products heavier than rated weights as it may cause instability and possible injury.

The PM-FM12-100 supports VESA 75x75 and 100x100 mounting hole patterns.

It supports displays with a diagonal from 33cm (13") up to 69cm (27") and a maximum load capacity of 25kg (55lbs).

PM-FM10-200 supports VESA 100x100, 200x100, and 200x200 for displays ranging from 58cm (23") up to 107cm (42") in diagonal size.

The maximum load capacity of PM-FM10-200 is 30kg.

The PM-FM10-200 mount allows for a wall distance ranging from 56mm up to 205mm.

It supports VESA 100x100, 200x100, and 200x200 standards, making it compatible with displays ranging from 58cm (23") up to 107cm (42") diagonal.

The tilt can be adjusted from 3° up to -10° and swivel up to 90° in both directions.

The wall distance can be adjusted from 56mm up to 415mm.

The PM-FM30-400 has a load capacity of 50kg (110lbs).

The PM-FM30-400 supports VESA 200x200, 300x300, 400x200, and 400x400 mounting patterns.

The PM-FM30-400 is compatible with TV sizes from 26" to 52" (66-132cm).

Installation on drywall or other weak materials is prohibited; it must be mounted to reinforced wall stud or solid concrete or brick walls only.

The PM-FM31-600 supports VESA 200x200, 300x300, 400x200, 400x400, and 600x400.

The maximum load capacity of the PM-FM31-600 is 50kg (110lbs).

It supports VESA patterns 200x200, 300x300, 400x200, and 400x400.

Use the mounting screws provided and do not over tighten. For installation to a solid concrete wall use suitable anchors (not included). Mounting to drywall or other unsuitable surfaces is not recommended. Check carefully for hidden electrical cables or water pipes before installation.

The PM-FM50-600 TV mount supports a maximum weight of 60kg.

The PM-FM50-600 is compatible with VESA 200x200, 300x300, 400x200, 400x400, and 600x400.

The PM-FM10-400 supports screens sized 32-55" (81-140cm) with a max load of 30kg (66lbs).

The PM-FM10-400 is compatible with VESA patterns 100x100, 200x100, 200x200, 300x200, 300x300, 400x200, and 400x400.

The wall structure must support at least five times the combined weight of the equipment and all attached hardware and components.

Load Capacity: Max. 20kg.

Wall Distance: 62mm up to 309mm.

This TV mount supports VESA standards including 100x100, 200x100, 200x200, 300x200, 300x300, 400x200 and 400x400.

The bracket can support devices with a screen diagonal from 32 inches (81 cm) up to 55 inches (140 cm).

The PureMounts TV mount allows for a tilt range of 3 up to -10 and a swivel range of 90 up to -90, depending on the wall distance and screen width.

The wall distance ranges from 62mm up to 422mm.

It must be installed strictly according to the instructions by a qualified installer. Use only the parts provided. This product is intended for indoor use only. Check security regularly at least twice every year.

Tiltable up to 15° and down to -15°, and swivable 360° for the perfect viewing angle.

The maximum hole spacing for attaching the bracket to the projector is 320mm.

It has a distance of 150mm from the ceiling.

Tiltability from 15° to -15° and a 360° swivel range.

The ceiling distance ranges from 545mm up to 900mm.

It is for hole patterns up to 320mm on the projector.

1x PM-SPIDER-20W Projector Ceiling Mount, white; 1x Set of Screws; 1x Installation Manual.

The PM-OFFICE-01 supports VESA 75x75 and 100x100 and has a maximum load capacity of 8kg.

The PM-OFFICE-01 can hold displays with a diagonal size from 33cm (13") to 69cm (27").

It offers tilt from 45° up to -45°, swivel from 90° up to -90° depending on monitor width, and 360° rotation.

The arm length is 428mm, the height tube is 450mm, and the clamp width fits desks from 10mm to 88mm thick.

The package includes one PM-OFFICE-01 desk mount, a set of screws, and an installation manual.

The product should only be installed by professionals; improper installation may cause injury. Screws should be tightened firmly but not over tightened. The supporting surface must safely support the equipment weight.

PM-OFFICE-02 supports displays with a diagonal size ranging from 33cm (13") to 69cm (27") and can carry a maximum load of 8kg per arm.

PM-OFFICE-02 supports VESA 75x75 and 100x100 standards.

Use only attachments and/or hardware supplied by the manufacturer, avoid installing the mount on a wall with hidden wires or pipes, tighten screws firmly but do not overtighten, and check that the bracket is secure at regular intervals (at least every three months).

The mount has a maximum load capacity of 8kg per arm.

The mount supports VESA 75x75 and 100x100.

Each arm can tilt 45° up to -45° and swivel 90° up to -90°, depending on screen width; the middle joint is not swivelable.

The arms have a length of 428mm each, the height tube is 450mm, and the clamp width ranges from 10mm to 88mm.

Compatible monitors have a diagonal of 33cm (13") to 69cm (27").

The mounting surface must be strong and stable enough to support the mount and the monitors; tighten screws firmly but do not overtighten; the structure must support five times the combined weight of all equipment.

The load capacity max. 8kg / arm is guaranteed by a high-quality material selection (steel).

Each arm: Tilt 45° up to -45°, swivel 90° up to -90° (relying on screen width), rotatable 360°: Enjoy complete control over your monitor's positioning.

The maximum loading weight of this product is 2kg/4.4lbs.

Do not install on plasterboard/gypsum type surfaces.

This product is not designed for outdoor use.

The maximum load capacity is 2kg (4.41lbs).

The mount is only suitable for stable and adequately fixed surfaces and components.

Read the entire instruction manual before installation and ensure the product is complete and undamaged.

The manufacturer is not liable for damage caused by improper installation, operation or maintenance not described in the manual and any use other than described voids warranty and guarantee.

This product complies with Directive 1907/2006/EU and 2011/65/EU.

PM-SOUND-B is rated for 15kg (33lbs) maximum load capacity.

The PM-SOUND-B mount supports VESA sizes 200x100, 200x200, 400x200, 400x400, and 600x400.

Do not install on plaster board or an unstable surface; the mounting surface must safely support the load. Use only indoors. Tighten screws firmly but do not overtighten. Installation must comply with local or national building codes.

The speaker mount is rated for 3.5 kg (7.7 lbs).

The mount has an adjustment range of 140° horizontally and +20° / -20° vertically.

Do not hang large size speakers from the brackets to avoid the risk of instability of the center of gravity.

It supports 32-55” / 81-140cm and is rated for 40Kg (88lbs).

It accommodates 200x200/300x200, 300x300/400x200, 400x300/400x400, and 600x400 VESA mounting patterns.

The model is PM-TVS-01 and the manual version is 1.0.

Load capacity max. 35kg.

Supports VESA 200x200, 300x300, 400x200, 400x400, 600x400.

The adapter supports VESA 75x75 up to 100x100, making it suitable for displays ranging from 33cm to 69cm (13"-27").

The adapter has a load capacity of 10kg.

The booms can be extended to the front in a range from 385mm to 535mm.

Wall measurements: 430mm x ca. 273mm.

8kg (17.61lbs) RATED weight symbol

Recommended mounting surface: solid brick, concrete or solid wood studs.

The product is designed for indoor use only and must not be used outdoors.

The item number is PM-SHELF-02 and it belongs to the PureMounts product group.

Do not use W-A for concrete or brick walls. Use W-C for concrete or brick walls. For mounting on wood or metal (not concrete/brick) use W-A.

The maximum load rated is 15kg.

This product complies with Directive 1907/2006/EU and 2011/65/EU.

The mount can safely support even larger microwaves with a maximum load capacity of 35kg.

The mounting hardware supplied is for use with timber stud walls or solid concrete walls only.

The load capacity of the PM-MWH-03 microwave mount is max. 35kg (77lbs).

The booms of the mount can be adjusted between 385mm and 535mm with a boom width of 43mm.

The mount is designed to fit walls with measurements of 430mm x ca. 273mm.

The PM-MWH-03 mount has a powder-coated white color.

The delivery includes 1x PM-MWH-03 Microwave Mount, white, 1x Set of Screws, and 1x Installation Manual.

This product is intended for indoor use only.

PT-AA220 delivers 2x20W Watt stereo output at 4 Ohms or can be bridged to 1x40 Watt mono output at 8 Ohms.

Volume, bass and treble controls are provided via front panel buttons, IR remote and RS232 control.

Yes, PT-AA220 supports RS232 commands with communication protocol at baud rate 9600, data bit 8, stop bit 1, no parity bit, and there are 22 documented commands.

The loop output allows transmission of the input signal to the next amplifier or can be used as a line level output to facilitate integration of multiple units or other hardware.

The PT-AA140 has 2 stereo inputs (1x3.5mm jack for line in, 2xRCA for L&R), 1 digital input and 1 balanced MIC input.

The PT-AA140 supports mono audio output with output voltage switchable between 70V and 100V and rated power output of 40 Watt.

The PT-AA140 provides an RS232 control interface with communication protocol RS232, baud rate 9600, data bit 8, stop bit 1, no parity and 25 documented commands. It also has front panel buttons and supports IR remote control.

The PT-PSU12 supports an input voltage of 100~240VAC and selectable output voltages of 5V, 12V, or 24V DC.

Output channels can be switched on/off by the front panel buttons, RS232 commands, or Web-based GUI. Output voltage can be selected via TACT Switch on the rear panel, RS232 commands, or Web-based GUI.

The input uses two AC input channels (AC1 & AC2). The 12 output channels have 2-Pin Phoenix connectors for DC output.

It features an RS232 port (3-Pin Phoenix connector) and a TCP/IP Ethernet port with default IP 192.168.0.178 and port number 4001 for control via RS232 commands and Web-based GUI respectively.

Do not dismantle or modify the module. Install in a place with good ventilation. Keep the module away from liquids and do not expose to rain or moisture. Do not put heavy items on the extension cable. Unplug power when unused for long periods, and do not use liquid or aerosol cleaners.

The input is 1 x HDBaseT (RJ45) and the output is 1 x HDMI. It supports HDMI 1.4a & HDCP2.2 and a bandwidth of 10.2Gbps.

It outputs audio via 1 x Stereo Out, 1 x Digital COAX (RCA), and 1 x OPTICAL (Toslink). It supports Dolby D (True HD), DTS (HD-Master Audio), and PCM audio formats.

It supports bi-directional IR and RS232 pass-through for long-distance control, with control ports including 1 x IR In (3.5mm Jack), 1 x IR Out (3.5mm Jack), and 1 x RS232 (3 pin Phoenix).

It supports Full HD up to 1080p at distances up to 70m and 4K UHD up to 40m over HDBaseT. It can display signals at resolutions up to 4K @60 4:2:0 (10.2Gbps).

The device supports CEC, EDID, IR, and RS232 pass-through with bi-directional RS232 and IR control.

The PT-HDBT-200 supports pass-through for IR, CEC, and RS232 control signals.

The PT-HDBT-200 supports bidirectional Power over Cable (PoC), allowing power supply in both directions to reduce cabling requirements.

The dimensions are 115mm x 16mm x 84mm. The transmitter weighs 150g and the receiver weighs 153g.

The PT-HDBT-701-TXWP features one HDMI input, one VGA input, and one 3.5mm stereo audio input.

HDMI input supports up to 4K/UHD@ 60Hz 4:2:0 resolution and VGA input up to 1920x1200. Transmission distance is up to 70m@1080p and 40m@4K over a single Cat5e/6/7 cable.

The PT-HDBT-701-TXWP supports RS-232 commands for control and has an RS232 serial port as well as a micro-USB connector for firmware updates.

The PT-FMX-16 is compatible with HDMI, HDBaseT, and VGA signal cards.

The switcher is controllable via front panel buttons, IR, RS232, and TCP/IP.

RS232 control parameters are baud rate 9600, data bit 8, stop bit 1, parity bit none; 70 documented commands are supported.

RS232 Control (Baud rate: 9600; Data bit: 8; Stop bit: 1; Parity bit: none.), 106 documented commands; TCP/IP Commands (IP: 192.168.0.178; Subnet Mask: 255.255.255.0; Gateway: 192.168.0.1; Serial Port: 4001), 1 documented commands.

Default settings: IP: 192.168.0.178; Subnet Mask: 255.255.255.0; Gateway: 192.168.0.1; Serial Port: 4001. IP & gateway can be changed as you need, Serial Port cannot be changed.

Comprehensive signal card compatibility: HDMI/HDBaseT/VGA. Automatically recognize input/output signal card.

Controllable via front panel buttons, IR, RS232 & TCP/IP.

The PT-MA-HD88UHD has 8 HDMI inputs and 8 HDMI outputs.

It supports 4Kx2K@60Hz 4:4:4 and 1080p 3D signals, HDMI 2.0, HDCP2.2, and is backward compatible to earlier versions.

It can be controlled via front panel buttons, IR, RS232, TCP/IP and GUI.

The RS-232 control interface operates at Baud rate 9600, Data bit 8, Stop bit 1, Parity bit none, with 42 documented commands.

It provides powerful EDID management with built-in EDID that can be invoked via DIP switch on the rear panel, RS232 command or GUI.

It requires 24VDC at 2.71A and has a power consumption of 21W.

DVI video supports digital signal, VGA supports VGA, YPbPr and C-video format. VGA input port supports YPbPr, C-video and VGA format.

The product supports HDBT2.0, transmitting 4Kx2K signal up to 100m via single CAT5e/CAT6 cable.

The PT-PMS-62 has 3 HDMI, 1 VGA, 1 DisplayPort, and 1 USB-C inputs, with HDMI up to 4Kx2K@60Hz 4:4:4, VGA up to 1920x1200@50/60Hz, DP up to 4Kx2K@60Hz 4:4:4, and USB-C up to 4Kx2K@30Hz. Outputs are 1 HDMI and 1 HDBaseT with HDMI loop, both up to 4Kx2K@60Hz 4:4:4.

PT-PMS-62 includes external balanced audio inputs for HDMI inputs, stereo auxiliary audio for VGA input, and balanced MIX audio input. Outputs include balanced audio and digital SPDIF audio outputs. Frequency response is 20Hz to 20KHz ±3dB.

The PT-PMS-62 supports RS-232 commands with baud rate 9600, data bit 8, stop bit 1, parity none, offering 99 documented commands, plus additional 12 documented RS232 commands.

The HDBaseT output supports 24V PoC and can transmit HDMI signals up to 40 meters at 4K and 70 meters at 1080p.

Users press one of six input buttons to select input, then press either 1.HDMI or 2.HDBT output button to select the output. Press input button again or wait three seconds to confirm switching. AUTO button enables auto switching mode.

The PT-PSW-92 supports 1 x HDBaseT (RJ45), 1 x DisplayPort, 5 x HDMI, and 2 x VGA video inputs. It has 1 x HDMI and 1 x HDBaseT video output.

The PT-PSW-92 supports output resolutions of 1280x720 (Default), 1920x1080, 1024x768, 3840x2160@30Hz (4:4:4), and 3840x2160@60Hz (4:2:0).

The HDBaseT input supports distances of up to 70m at 1080p and 40m at 4Kx2K. The HDBaseT output supports distances up to 100m at 1080p and 70m at 4Kx2K on a single CAT5e/6/7 cable.

The microphone input supports 48V phantom power mode for condenser microphones, MIC mode for dynamic microphones, and LINE mode for wireless microphone or line audio. DIP switch selects the mode.

The PT-PSW-21 measures 195mm x 23.6mm x 100mm and operates between -10°C and +40°C.

The PT-PSW-21 features full 4K scaling on the output and has built-in advanced EDID management.

The PT-PSW-41H has 2 HDMI inputs, 1 DP input, and 1 VGA input with auxiliary audio, and one HDMI output with stereo audio extraction.

The unit measures 230mm x 23.6mm x 100mm, weighs 320g, requires a 12VDC 2A power supply, and has a maximum power consumption of 35W.

The PT-PSW-61 has 6 video inputs (4 HDMI, 2 VGA), 2 auxiliary audio inputs (switched following VGA), and 1 HDMI output. It also has 3 audio outputs: 1 dual-mono analog audio, 1 3.5mm stereo audio, and 1 optical audio.

The PT-PSW-61 bypasses HDMI and supports resolution adjustment with 6 types total and supports resolutions up to 4K and 1080p 3D. It supports HDMI 1.4 and complies with HDCP 1.4.

The PT-PSW-61 can be controlled via front panel buttons, RS232 commands, and IR remote.

RS-232 settings are Baud rate: 9600, Data bit: 8, Stop bit: 1, Parity bit: none with 69 documented commands. Commands include switching input sources, enabling/disabling auto-switching, resolution changes for VGA input, locking/unlocking front panel buttons and video settings adjustments.

Do not dismantle or modify the module, avoid exposure to rain or moisture, install in a well-ventilated place, keep away from liquids, do not twist or pull optical cables forcefully, unplug power before cleaning or when unused for long periods, and treat scrapped devices as electrical waste.

The PT-SP-HD12UHD has 2 simultaneous HDMI output ports and 1 HDMI input port, all female type A HDMI 2.0 connectors.

It requires a DC5V 2A power supply and its maximum power consumption is 4.5W.

Do not dismantle or modify the module; avoid exposure to rain, moisture or liquids; prevent heavy items on extension cables; do not twist or pull optical cables; unplug power when unused long-term; and install with proper ventilation.

PT-SP-HD14UHD has 1 HDMI input port and 4 HDMI output ports.

The maximum resolution supported is 4Kx2K@60Hz 4:4:4 with a maximum data rate of 18Gbit/s.

PT-SP-HD14UHD is compliant with HDCP2.2 and backward compatible with HDCP1.4.

The source device gains EDID data from the display connected to output 1 port. If output 1 display is disconnected, PT-SP-HD14UHD must be restarted to gain EDID from output 2. All displays should be compatible with the selected resolution from output 1.

The PT-SP-HD12S has 1 HDMI input port and 2 HDMI output ports. The input is a female type A HDMI 1.4 connector, and the output consists of two female type A HDMI 1.4 connectors.

The PT-SP-HD12S supports EDID management and automatically adopts the resolution of the first detected display from output ports 1 to 2. It sets the output resolution to fit all displays based on the first detected display.

The PT-SP-HD12S uses a DC 5V 1A power supply and has a maximum power consumption of 2.5 W.

It supports comprehensive resolution capacities up to 4K×2K, 1080P 3D@60Hz and is compliant with HDMI 1.4 and HDCP 1.4.

The PT-SP-HD14S supports EDID management and automatically adopts the resolution of the first detected display from port 1 to 4 for signal distribution to all outputs.

The front panel includes a Power LED, Input HDCP compliant LED, Output signal LEDs for HDMI outputs 1 to 4, and a USB port used for firmware update.

It uses a DC 5V 1A power adapter and consumes a maximum of 3.6W power.

Do not dismantle or modify the module; do not expose it to rain or moisture; keep away from liquids; do not twist or pull the optical cable ends; unplug power when unused for long; install with good ventilation.

This device outputs audio via balanced Phoenix, stereo RCA, and coaxial digital COAX connectors supporting Dolby D (True HD), DTS (HD-Master Audio), and PCM audio formats.

It supports three audio modes: PASS (default) for source EDID from display, BITSTREAM for passing DTS/Dolby via HDMI and coaxial with no analog output, and PCM for outputting digital audio via analog and coaxial outputs.

It supports CEC pass through for simplified control and EDID management including fixed EDID masking for AVR compatibility to ensure communication between devices.

The device measures 129mm x 21.5mm x 77mm, weighs 244g, and requires a 12VDC 1A power supply with a locking barrel 5.5mm outside diameter and 2.1mm inside diameter.

The PT-SW-HD41S supports HDMI 1.4 standard and video signals including 480p, 720p, 1024x768, 1280x800, 1080p, and 3840x2160@30Hz.

PT-SW-HD41S supports ARC audio output socket to transfer ARC audio and HDMI supports ARC function.

PT-SW-HD41S has a bandwidth of 10.2Gbps.

PT-SW-HD41UHD has 4 HDMI inputs and 1 HDMI output.

Select input source by “SOURCE” button on the front panel, IR Remote, or RS232 command; corresponding indicator will illuminate.

Powered by 5VDC, 2A power adapter with max power consumption 5W.

Firmware update can be done online via the USB port on the front panel by copying the latest upgrade file (.bin) to the device's BOOTDISK.

The patchpanel comes equipped with a support bar for cable management and has versatile grounding options for added safety and stability.

It is available in two colour options: grey (RAL7035) or black (RAL9005), with customizable front panel labeling for easy identification.

For T568A Pin 1: White / Green, Pin 2: Green, Pin 3: White / Orange, Pin 4: Blue, Pin 5: White / Blue, Pin 6: Orange, Pin 7: White / Brown, Pin 8: Brown.
For T568B Pin 1: White / Orange, Pin 2: Orange, Pin 3: White / Green, Pin 4: Blue, Pin 5: White / Blue, Pin 6: Green, Pin 7: White / Brown, Pin 8: Brown.

The PureLink CSW110 allows you to send a connected HD signal wirelessly to your HDTV or HD projector. Examples of HD devices: Blu-ray players, HD set-top boxes, PlayStation4, XboxOne, etc.

The CSW110 supports FullHD resolutions up to 1080p and all 3D formats. Supported HDTV resolution (HDMI) includes 1080p, 720p, 576p, 480p, and supported 3D formats are Frame Packing 1080p@24Hz, 720p@50/60Hz.

Connect the HDMI IN of the CSW110 transmitter with a source device using an HDMI cable and optionally connect the HDMI OUT for loop-through. Connect the HDMI OUT of the CSW110 receiver to a display device. Use the IR emitter and IR receiver if you need IR extension. Connect the 5V1A power adapters to transmitter and receiver respectively. To pair, press the MODE key on receiver and then transmitter.

In a direct line-of-sight, the maximum range of A/V signal transmission can reach up to about 30 meters. The optimum indoor range is under 30m.

Only use the power adapters provided with the CSW110. The power output must be 5V DC, 1A centre positive. The adapters supplied are switch mode power adapters with 100-240V AC @ 50-60Hz input and 5V1A DC output.

The receiver has a 2 channel D-type amplifier and provides 2x 25Wrms@4Ohm.

The transmitter input is 5V DC, 600mA, Cable Length: 1.8m. The receiver input is 18V DC, 3.6A, Cable Length: 1.8m + 1.5m.

Operating Range: 15m (Line of Sight).

Germany, Austria, BE, BG, CZ, DK, EE, IE, EL, ES, FR, HR, IT, CY, LV, LT, LU, HU, MT, NL, PL, PT, RO, SI, SK, FI, SE, UK.

CSW620 works on the 2.4 GHz ISM frequency band.

The delivery content includes 1x 2.4GHz Wireless Subwoofer TX, 1x 2.4GHz Wireless Subwoofer RX, 2x Power Supply 5V DC, 600mA, 2x Subwoofer Cable Length: 70cm, and 1x User Manual.

The operating range is 15m (Line of Sight).

Blue LED blinks 3 times per second in Pairing Mode; Blue LED glows permanently when connected and working; Blue LED blinks every 2 seconds when not paired; Red LED glows permanently in Standby Mode.

Subwoofer Audio Cable with RCA connectors is used for connection between TX or RX units and subwoofer or amplifier.

The MCA100 Easy Crimp Tool offers precise crimping for secure connections every time, effortless operation for professional-grade results, and an ergonomic design for comfortable, efficient use.

The scope of delivery includes 1x MCA100 Easy Crimp Tool.

Only qualified personnel should perform the installation; the safety requirements must be observed.