HDA-250905
HDA MHUB (4x4) 100A
The MHUB 6x6 100A is an AV matrix for 4K HDR multi-room distribution featuring built-in uControl and integration with smart home platforms such as Control4, Crestron, and Savant. It delivers zero-latency video up to …
ManualFAQSpecificationsDatasheetCEFAQ
How can one test that IR control is functioning correctly with the MHUB system?+–
Testing basic operation from a display ‘back’ to MHUB To verify that IR control is working correctly proceed to any display receiver location with an IR RX connected to it. Use the MHUB Room Remote to select a source with an IR TX connected to it at the MHUB end. You should notice that the MHUB switches to that source on your display. Now pick up your source remote control for the source you just switched to and attempt to control the source using the native remote control. If both work then you have setup IR control correctly. Repeat this step for all display receiver locations.
More:Testing that IR control worksUsing the Master & Room remote →
What are the recommended cabling guidelines for HDMI and network cables with the MHUB system?+–
HDANYWHERE recommends using suitably robust and good quality HDMI cables. It is not advised to use passive HDMI cables over 5 metres in length either on the inputs or the outputs of MHUB or its display receivers. Where HDMI cables longer than 5 metres are required, HDA recommends utilising it own brand of long distance HDMI cables or suitable alternative. A good video demonstrating this can be found here: https://youtu.be/EbWAEndiCuU Terminate using RJ45 connectors to 568B wiring standard. DO NOT USE COPPER CLAD ALUMINIUM/STEEL (CCA/CCS ) Cat CABLE.
More:Cabling →