AktivMuligt alternativ: PT-SW-UH41-48G
PT-SW-HD41USB
4x1 4K 18 Gbps HDMI-samarbejdsswitch
PT-SW-HD41USB er en 4x1 HDMI og USB Switcher, der samler fire HDMI 2.0-inputs og fire USB-B 3.2 (Gen1x1) forbindelser til et enkelt HDMI-output med understøttelse af op til 18Gbps båndbredde og opløsninger op til 4K@60 …
ManualStyring (TCP/IP)FAQSpecifikationerDatabladAlternativ tilgængeligFirmwareCE-erklæring ↗Tilgængelige styringsinterfaces. Udvid en aktiv type for at se den fulde kommandotabel.
Ingen matchende kommandoer.
RS232 Command46 kommandoerAktiv
Kilde: manual, kapitel RS232 Command, side 18
| Kommando | Beskrivelse | Svar | |
|---|---|---|---|
| #GET_FIRMWARE_VERSION | Hent softwareversion. | @V1.0.0 | |
| #SET_KEYPAD_LOCK 0 | Lås op for frontpanelknapper (Fabriksindstilling). | @FRONT PANEL UNLOCK! | |
| #SET_KEYPAD_LOCK 1 | Lås frontpanelknapper. | @FRONT PANEL LOCK! | |
| #GET_KEYPAD_LOCK | Hent låsestatus for frontpanelknapperne. | @FRONT PANEL UNLOCK! @FRONT PANEL LOCK! | |
| #SET_AUTO_KEY_LOCK 0 | Lås op for AUTO-knap. | @AUTO PANEL UNLOCK! | |
| #SET_AUTO_KEY_LOCK 1 | Lås AUTO-knappen. | @AUTO PANEL LOCK! | |
| #GET_AUTO_KEY_LOCK | Hent låsestatus for AUTO-knappen. | @AUTO PANEL UNLOCK! @AUTO PANEL LOCK! | |
| #SET_HDMI_DETECTION_MODE 0 | Indstil detektionsmetoden for HDMI-kildeinput til 5V. | @INPUT_SIGNAL_DETECTION 0! | |
| #SET_HDMI_DETECTION_MODE 1 | Indstil detektionsmetoden for HDMI-kildeinput til TMDS. | @INPUT_SIGNAL_DETECTION 1! | |
| #GET_HDMI_DETECTION_MODE | Hent detektionsmetode for HDMI-kildeinput. | @INPUT_SIGNAL_DETECTION 0! @INPUT_SIGNAL_DETECTION 1! | |
| #GET_STATUS | Hent systemstatus. | @RS232 QUERY STATUS! @WUH4-HUB @V1.0.0 @FRONT PANEL UNLOCK! @HDMI OUT SWITCH TO AUTO MODE! @HDMI IN SWITCH TO 1! @OUTPUT_HDCP 0! @INPUT_SIGNAL_DETECTION 0! @IIS OUT ON! @SWITCHMODE 0! @USB SWITCH MODE TO 0! @USB SWITCH TO 1! @AUTO PANEL UNLOCKED! @RS232 BAUDRATE IS 1! | |
| #FACTORY_RESET | Gendan fabriksindstillinger | @FACTORY DEFAULT! @WUH4-HUB @V1.0.0 @HDMI OUT SWITCH TO AUTO MODE! @OUTPUT_HDCP 0! @IIS OUT ON! @INPUT_SIGNAL_DETECTION 0! @HDMI IN SWITCH TO 1! @USB SWITCH MODE TO 0! @RS232 BAUDRATE IS 1! | |
| #REBOOT | Genstart enheden. | @REBOOT | |
| #HELP | Hent alle kommandoer og deres anvendelse. | … | |
| #SET_AV H1 | Skift til HDMI kilde 1. | @HDMI IN SWITCH TO 1! | |
| #SET_AV H2 | Skift til HDMI kilde 2. | @HDMI IN SWITCH TO 2! | |
| #SET_AV H3 | Skift til HDMI kilde 3. | @HDMI IN SWITCH TO 3! | |
| #SET_AV H4 | Skift til HDMI kilde 4. | @HDMI IN SWITCH TO 4! | |
| #GET_AV | Hent den aktuelle HDMI-kilde. | @HDMI IN SWITCH TO 1! | |
| #SET_AUTO_SWITCH 1 | Aktivér automatisk skift (Fabriksværdi). | @HDMI OUT SWITCH TO AUTO MODE! | |
| #SET_AUTO_SWITCH 0 | Deaktiver autoskift | @HDMI OUT SWITCH TO MANUAL MODE! | |
| #GET_AUTO_SWITCH | Hent status for automatisk switching. | @HDMI OUT SWITCH TO AUTO MODE! @HDMI OUT SWITCH TO MANUAL MODE! | |
| #SWITCH_MODE 1 | Skiftemodus 1. Hurtig skift. | @SWITCHMODE 1! | |
| #SWITCH_MODE 0 | Skiftemodus 2. Normal skift. | @SWITCHMODE 0! | |
| #GET_SWITCH_MODE | Hent skiftemode. | @SWITCHMODE 0! | |
| #SET_SWITCH_USB [PARAM] | Skift USB til [PARAM]. [PARAM] = 1~4. 1 - PC1 2 - PC2 3 - PC3 4 - PC4 | #SET_SWITCH_USB 1 @SET SWITCH MODE 1! @SET USB SWITCH TO 1! | |
| #GET_SWITCH_USB | Hent PC som USB er switch'et til. | @USB SWITCH TO 1! | |
| #SET_USB_SWITCH_MODE 0 | Indstil USB skifte-tilstand til at følge video-skiftet. | #SET_USB_SWITCH_MODE 0 | |
| #SET_USB_SWITCH_MODE 1 | Set USB switching mode to command control by “#SET_SWITCH_USB”. | @SET USB SWITCH MODE 1! | |
| #GET_USB_SWITCH_MODE | Hent USB switching-tilstand. | @USB SWITCH MODE TO 0! | |
| #SET_IIS 1 | Tænd for stereo lydudgang. | @IIS OUT ON! | |
| #SET_IIS 0 | Sluk for stereo lydoutput. | @IIS OUT OFF! | |
| #GET_IIS | Hent status for stereo audio output. | @IIS OUT ON! @IIS OUT OFF! | |
| #SET_EDID_MODE [PARAM] | [PARAM]= 0000~0011 [PARAM]=0000, set the EDID mode to Pass-through (Factory default). If the source device can’t read EDID from display device, it will use the built-in EDID: 3840x2160@60Hz Deep Color Stereo Audio. [PARAM]=0001/0010/0011, set the EDID of source device to user-defined EDID 0001/0010/0011. | #SET_EDID_MODE 0000 @EDID_MODE 0000! | |
| #GET_EDID_MODE | Hent EDID-tilstand. | @EDID_MODE 0000! | |
| #EDIDR [PARAM] | Hent EDID-værdien. [PARAM]= 0000~0011. | @EDID HEX STRING OF '0000': 00 FF FF FF FF FF FF 00 41 0C F2 08 50 12 00 00 … … | |
| #UPLOAD_USER_EDID [PARAM] | [PARAM]=0001/0010/0011, upload brugerdefineret EDID. Når kommandoen anvendes, beder systemet om at uploade EDID-filen (.bin). Operationen annulleres efter 10 sekunder. | #UPLOAD_USER_EDID 0001 @PLEASE SEND THE EDID FILE! … … @RECEIVED THE FILE, LENGTH=256! @EDID0001 UPDATE SUCCESSFULLY! | |
| #SET_RS232_BAUD 1 | Indstil RS232 baudrate til 9600. | @RS232 BAUDRATE IS 1! | |
| #SET_RS232_BAUD 2 | Indstil RS232 baudrate til 19200 | @RS232 BAUDRATE IS 2! | |
| #SET_RS232_BAUD 3 | Indstil RS232 baudrate til 38400 | @RS232 BAUDRATE IS 3! | |
| #SET_RS232_BAUD 4 | Indstil RS232 baudrate til 57600 | @RS232 BAUDRATE IS 4! | |
| #SET_RS232_BAUD 5 | Indstil RS232 baudrate til 115200 | @RS232 BAUDRATE IS 5! | |
| #GET_RS232_BAUD | Hent RS232 baudrate. | @RS232 BAUDRATE IS 1! | |
| #SET_THE_DISPLAY_TO 0 | Indstil displayet til at vise sort skærm. | @THE DISPLAY SIDE SCREEN IS BLACK! @THE DISPLAY IS ALREADY OFF! | |
| #SET_THE_DISPLAY_TO 1 | Væk displayskærmen op. | @WAKE UP THE SCREEN! @THE DISPLAY IS ALREADY ON! | |
| #GET_THE_DISPLAY | Hent status for displayenhed. | @THE DISPLAY IS OFF! @THE DISPLAY IS ON! |